IR 3570 Clean glass message

[Northwestservice]

i have turn off dirty glass detection cleaned glass, cleaned adf pressure roller and area and still being told to dirty glass. what am i missing?

[Hankster]

Re: IR 3570 Clean glass message

Ok if you go into service mode option-body- DFDSTL1 AND DFDSTL2 to 25 factory settings are usually over 200

[teckat]

Re: IR 3570 Clean glass message

to ADD on>>>

DFDST-L1 and DFDST-L2.
When using the ADF, the user may be prompted to clean the reader glass.The adjustment range is 0 to 255. "0" will turn the function off. Setting a higher value makes it easier to detect small particles on the glass. When making the adjustments it is advised to adjust both settings at the same time.

[Northwestservice]

Re: IR 3570 Clean glass message

thank you for your replies will set machine on my next visit. and thanks for the explianation of the setting!

[ragajungle]

Re: IR 3570 Clean glass message

This will work on ALL Canons. They all do this.

[mrfixit51]

Re: IR 3570 Clean glass message

This will work on ALL Canons. They all do this.

Since the iR4570 series, but not before that one came into being...