IR3025 Blank screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • LennoxD
    Technician
    • Sep 2011
    • 82

    IR3025 Blank screen

    Black screen. no boot up when power on but power LED is light on control panel. Any suggestion
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16092

    #2
    Re: IR3025 Blank screen

    Originally posted by LennoxD
    Black screen. no boot up when power on but power LED is light on control panel. Any suggestion

    controller power supplyFM2-2764-000

    When you turn on the machine there is no power up sequence, no LCD display, and the control panel Green LED is on. The All-Night Power Supply protection circuit may be shutting off power to all loads. The RMT1 and RMT2 signals are used to trigger the protection circuit and disable the power supplies.

    SEE>>>>No Power-No Display-CP LED On RMT1 Checks.doc
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • wellrajive
      Technician
      • Oct 2013
      • 31

      #3
      Re: IR3025 Blank screen

      solution is here..

      Comment

      • copier tech
        Field Supervisor

        5,000+ Posts
        • Jan 2014
        • 7921

        #4
        Re: IR3025 Blank screen

        Originally posted by LennoxD
        Black screen. no boot up when power on but power LED is light on control panel. Any suggestion

        When a Canon doesn't boot up its usually bad ram. Try cleaning the contacts but use a solvent not your fingers as in that YouTube video!
        Let us eat, drink, and be merry, because tomorrow we may die!

        For all your firmware & service manual needs please visit us at:

        www.copierfirmware.co.uk - www.printerfirmware.co.uk

        Comment

        • Brian8506
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2009
          • 1621

          #5
          Re: IR3025 Blank screen

          A friend had the same problem the other day and it was a loose connector on the main controller so don't rule out the easy ones.

          Comment

          Working...