IR c3080I drum

[vstar]

Customer wants us to replace one of the drums, and I was wondering is there a reset that I need to do and if so could someone please tell me ( IE service mode and sim)

Thanks

Cameron

[zoraldinho]

Re: IR c3080I drum

This model have automatic reset counter.

[Tricky]

Re: IR c3080I drum

Do a full auto-graduation adjustment after replacing the drum.

The drum count in service mode / display / misc should be zero.

[vstar]

Re: IR c3080I drum

Thanks everyone.
Skynet, how do I access servic mode on this model?

Thanks

Cameron

[zoraldinho]

Re: IR c3080I drum

add func.jpg 28 at the same time add func.jpg

[vstar]

Re: IR c3080I drum

Thanks zoraldinho,
I was at that machine and it is totaly different than I am use to. I had the whole assy out that holds the drums, toner hoppers, and transfer belt, but I can not figure out how the drum (black) comes out.
Could someone please tell me or send me the instructions to do this.

Thank you to everyone

Cameron

[Paul 75]

Re: IR c3080I drum

Once you've got the process assy out , push the button on the top of the ITB assy. This will release and you then lift up the ITB to the left. It will stay upright on its own. Then there is a white slide lock that sits on top of all drum units, slide to the right and then pull out drum towards you.

Job done..... Full Autograd when machine goes into ready.

[vstar]

Re: IR c3080I drum

Thank you Paul 75, I will get back there today.

Thanks again

Cameron