C9075, will it run on 240v ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #16
    Re: C9075, will it run on 240v ?

    Originally posted by tinnyjay
    If you see parts manual of Canon IR7105 about power supply (all day power supply) it is written 200 volts and it works with 240 volts.

    in theory a
    208 volt single phase item, could work on a 240 volt single phase circuit.










    In a 120/240 single phase system, the midpoint of the secondary side of the transformer is tapped and grounded to create a neutral. From the midpoint to any line reads 120V, and from line-to-line (the full voltage) reads 240V.

    Imagine planting a black flag in the sand, walking 120 steps in a straight line, planting a white flag, and then walking another 120 steps in the same line to plant a red flag at the end.

    In a 120/208 three phase system, the neutral is at the center of three phases from the utility.
    In this case, using the walking in the sand analogy: A white flag is planted in the center. You walk 120 steps away from the white flag, and plant a black flag. You return to the white flag, turn 120 degrees, and walk another 120 steps, planting a red flag. You return to the white flag, turn 120 degrees, and walk 120 steps to plant a blue flag.

    Once this is done, you face the red flag from the blue flag, and count your steps as you approach it. There are 208 steps between flags.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    Working...