canon ir 5075 error 0202 and 0101

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • landspeeder
    Trusted Tech

    250+ Posts
    • Feb 2010
    • 355
    #16
    Re: canon ir 5075 error 0202 and 0101

    Originally posted by landspeeder
    Doesnt the one under the glass move on rails and not the DADF?
    Never mind I see the two plastic blk rails you were talking about
    You never realize how cheap a professional is until after you let an amateur do it.... and
    if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083
        #17
        Re: canon ir 5075 error 0202 and 0101

        Originally posted by landspeeder
        Never mind I see the two plastic blk rails you were talking about
        When u use the DADF for copying it's Reader (CIS) does not bring the paper to the glass for that Scanner (Glass Copies)

        Two completely different operations
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

          Comment

          • landspeeder
            Trusted Tech

            250+ Posts
            • Feb 2010
            • 355
            #18
            Re: canon ir 5075 error 0202 and 0101

            Originally posted by landspeeder
            Doesnt the one under the glass move on rails and not the DADF?
            Never mind I see the two plastic blk rails you were talking about
            You never realize how cheap a professional is until after you let an amateur do it.... and
            if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!

              Comment

              • landspeeder
                Trusted Tech

                250+ Posts
                • Feb 2010
                • 355
                #19
                update

                Originally posted by landspeeder:354900
                Originally posted by landspeeder
                Doesnt the one under the glass move on rails and not the DADF?
                Never mind I see the two plastic blk rails you were talking about
                So i went back and cleaned and lubed the three guides the glass plate moves on....changed the optical sensor that the flag on the glass plate passes thru and re-adjusted the belt ...it has worked perfect since Friday .....

                Thanks guys for the super nonstop input !!!!!
                You never realize how cheap a professional is until after you let an amateur do it.... and
                if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!

                  Comment

                  • saini.amit9660
                    #20
                    Re: canon ir 5075 error 0202 and 0101

                    Originally posted by landspeeder
                    So the service manual says a scanner homing issue...all errors have been cleared..it seems to work but there must be an adjustment ...what could that be....thanks
                    Please change paper tray side ADF CABLE

                      Comment

                      • Phil B.
                        Field Supervisor

                        10,000+ Posts
                        • Jul 2016
                        • 22798
                        #21
                        Re: canon ir 5075 error 0202 and 0101

                        Originally posted by saini.amit9660
                        Please change paper tray side ADF CABLE
                        6 yr dead thread...

                        the problem had been fixed in 2013...

                        not the fix you suggest

                          Comment

                          Previous 1 2 template Next
                          Working...