transfer belt c3220 or something else cleaning blade

[pc123321]

any advice are welcome
thanks

[Rick Martinez]

Re: transfer belt c3220 or something else cleaning blade

have you check the drum unit for droping toner? also check the transfer belt unit. and last check the fuser unit.

[HP:guy]

Re: transfer belt c3220 or something else cleaning blade

Where are you at in the PM cycle?

[teckat]

Re: transfer belt c3220 or something else cleaning blade

any advice are welcome
thanks

-----------------------------------
remove all drums>toners>fuser unit(keep duplex part slid out) remove ITB> remove cleaning blade assbly> take a flashlight look inside toward cleaning unit rail> get a vacuum (unplug printer first) and vacuum out all that waste toner on rail> & wipe down the Mylar sheet


Keep the ITB UNIT out
remove the metal plates> see undersides> bet they are dirty
throw the large plate in the garbage

now put back the small plate<> make sure to screw(1) in varistor(2) > then attach other varistor end under leaf spring ( see pic)

varistor need to be grounded under leaf spring (no where to screw in) or u will receive a random error code

ITB_Varistor.jpg

[pc123321]

Re: transfer belt c3220 or something else cleaning blade

-----------------------------------
remove all drums>toners>fuser unit(keep duplex part slid out) remove ITB> remove cleaning blade assbly> take a flashlight look inside toward cleaning unit rail> get a vacuum (unplug printer first) and vacuum out all that waste toner on rail> & wipe down the Mylar sheet


Keep the ITB UNIT out
remove the metal plates> see undersides> bet they are dirty
throw the large plate in the garbage

now put back the small plate<> make sure to screw(1) in varistor(2) > then attach other varistor end under leaf spring ( see pic)

varistor need to be grounded under leaf spring (no where to screw in) or u will receive a random error code

[ATTACH=CONFIG]21646[/ATTACH]

this drum is oem drum ----
why ?

[SAZ911]

Re: transfer belt c3220 or something else cleaning blade

Hi,

how many copies has that magenta drum done, by the looks of the copies posted that drum is way past its life........time for a clean and service then replace the drum.

[pc123321]

Re: transfer belt c3220 or something else cleaning blade

Hi,

how many copies has that magenta drum done, by the looks of the copies posted that drum is way past its life........time for a clean and service then replace the drum.

yellow : 50
magenta : 56
cyan : 50
black: 57
what wrong with me

[teckat]

Re: transfer belt c3220 or something else cleaning blade

yellow : 50
magenta : 56
cyan : 50
black: 57
what wrong with me

-----------------------------

DRUM % READINGS USUALLY MEAN NOTHING

have seen hundreds of defective DRUMS & or TONER cartridges for this model



just clean the printer> throw away M Drum

replace with all new drums> & new M Toner cartridge > then run your AUTO GRADATION ( every other day )



it's not Rocket Science !!!

[Canon.Tech]

Re: transfer belt c3220 or something else cleaning blade

The picture of the magenta drum you posted is not from the C3220!?

[pc123321]

Re: transfer belt c3220 or something else cleaning blade

The picture of the magenta drum you posted is not from the C3220!?

one reason is very clear ----
all,this drum is not made by me ---that is for sure
i did not know where it made from ---
from ebay ------i did not want to mention more
i bought cyan and yellow from internet ,they got drums from tonermax---
before that cyan and yellow bought from ebay , when i open there is no tearing strip , that means two drums are used and sealed again to auction
the magenta drum is also bought from ebay ,it looks like new , all new packing , all my drums came from ebay (hp drum hp 8560...)before , this one is oem drum but it didn't like oem ----it's compatible or premium ,,,sounds strange
i bought one black from new york loyal computer ---canon dealer the sales respresentative said you drive 75miles round trip to got black drum

[teckat]

Re: transfer belt c3220 or something else cleaning blade

one reason is very clear ----
all,this drum is not made by me ---that is for sure
i did not know where it made from ---
from ebay ------i did not want to mention more
i bought cyan and yellow from internet ,they got drums from tonermax---
before that cyan and yellow bought from ebay , when i open there is no tearing strip , that means two drums are used and sealed again to auction
the magenta drum is also bought from ebay ,it looks like new , all new packing , all my drums came from ebay (hp drum hp 8560...)before , this one is oem drum but it didn't like oem ----it's compatible or premium ,,,sounds strange
i bought one black from new york loyal computer ---canon dealer the sales respresentative said you drive 75miles round trip to got black drum

-----------------------------------------------------------

1- do your printer maintenance
2- purchase OEM Products (Drums-Toner)
3- purchase a Manual for your Printer

this ends any future nonsense = "things of no importance or value" when u don't use OEM