Canon IC-6590 no power

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4702
    #1

    Canon IC-6590 no power

    Going out to look at this machine. Customer said the power light is lit but will not turn on. Is there a fuse or any known problem with pwr supply boards going bad? Or any other suggestions? Only 6k on meter.

    Thanks
    Tags: bad, canon, customer, fuse, light, meter, power, supply
    • canonbundy
      Senior Tech

      500+ Posts
      • Jun 2012
      • 607
      #2
      Re: Canon IC-6590 no power

      Originally posted by copyman
      Going out to look at this machine. Customer said the power light is lit but will not turn on. Is there a fuse or any known problem with pwr supply boards going bad? Or any other suggestions? Only 6k on meter.

      Thanks
      Not sure if the model is a typo error - however turn mc off/on and check for possible Fixing Error in Srv mode - clear error then off/on.

        Comment

        • Brian8506
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2009
          • 1664
          #3
          Re: Canon IC-6590 no power

          Also check for "download standby" message. Display lights may not be on but the message would still be visible.

            Comment

            • copyman
              Owner / Technician

              Site Contributor
              2,500+ Posts
              • Sep 2005
              • 4702
              #4
              Re: Canon IC-6590 no power

              Thanks for the replies. It is definitely a IC6590.

              Brian, If that "download standby" message is on display what does that mean?

              Thanks again

                Comment

                • Brian8506
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Feb 2009
                  • 1664
                  #5
                  Re: Canon IC-6590 no power

                  Firmware problem. You may be able to clear it by holding down 1 and 9 while turning power
                  Originally posted by copyman
                  Thanks for the replies. It is definitely a IC6590.

                  Brian, If that "download standby" message is on display what does that mean?

                  Thanks again

                    Comment

                    Previous template Next
                    Working...