Hey guys:
I went out to look at a Canon IR3320n copier that had gone through a blown power company transformer power failure/restoration.
Inspecting all fuses after attempting to clear the errors in service mode, found the 10A fuse on the INNER power supply unit (not sure the name) was blown and black.
Installed another 10a fuse and it blows immediately on power up, same error. I ohm'ed out the fuser leads (removed it) and got about .5megohm on one, 1 megohm on the other, heater leads ohm out at 24 ohms each white to common black.
Is it the power supply, and can someone feed me the name of it and part number? Or are there more things I need to check first??
Thanks in advance for any help. If anyone knows where I can get an inexpensive parts and service manual that would help as well.
I went out to look at a Canon IR3320n copier that had gone through a blown power company transformer power failure/restoration.
Inspecting all fuses after attempting to clear the errors in service mode, found the 10A fuse on the INNER power supply unit (not sure the name) was blown and black.
Installed another 10a fuse and it blows immediately on power up, same error. I ohm'ed out the fuser leads (removed it) and got about .5megohm on one, 1 megohm on the other, heater leads ohm out at 24 ohms each white to common black.
Is it the power supply, and can someone feed me the name of it and part number? Or are there more things I need to check first??
Thanks in advance for any help. If anyone knows where I can get an inexpensive parts and service manual that would help as well.
Comment