hallo evrybody l have code e065 in copieur canon 6028 . can you healpe me to rasult this problem ..or send me pdf technical. my e-mail: mecanopharme@hotmail.fr.
-
BEST TECHNICIAN . NICE PEOPLE . -
well i think you are working on a NP 6028 witch is the same as a NP 6030 the error code if for the transfer roller witch is under the drum unit...you can clean it really really good, or replace it is what it noramlly is but if it is not that check your static eliminator,high voltage termals,or composite power supply...hope this helps.. -
Actually it translates ito a NP-6035/ NP-6230, but the meaning of the code is the same. The differences in the models is minimal.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
e65
Also check the transfer roller connector for arching if not that the composite power supply is bad.Like the United States Postal Service It's a miracle it works!Comment
-
thank's.
dear technician thank you very much for your assistance technical but l need the pdf technical with you ...if anyone have please send me that for : mecanopharme@hotmail.fr
BEST TECHNICIAN . NICE PEOPLE .Comment
-
here is error code description from 6035 service manualComment
Comment