Ir advancC9280 pro E302-001

[CT Copier Repair]

Try to do the calibration from the tray tray and does not feed the setup per the manual
when doing the 2nd adjust from the doc feeder it doesn't lift the paper
and for the life of me where is the reader controller data sheet kept

Brian

Error display reads
E0302 0001 04 OD

[vigour]

Re: Ir advancC9280 pro E302-001

RCON info is kept on the panel between the hinges,
raise the feeder
remove 2 screws and hold that piece of raised plastic (handle)
look under panel for values.

We had a couple threads with E302 already

http://www.copytechnet.com/forums/ca...02-0101-a.html

http://www.copytechnet.com/forums/ca...02-0001-a.html

http://www.copytechnet.com/forums/ca...302-001-a.html