canon IR1023

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4535
    #1

    canon IR1023

    Customer said they are having quality issues, lines
    etc. They never had a drum so I was going to order
    that. Anything else besides drum and fuser that
    would cause quality issues? Any other PM items I
    should get when I order drum?

    Thanks in advance
    Tags: None
    • bipc
      Trusted Tech

      100+ Posts
      • Sep 2009
      • 194
      #2
      Re: canon IR1023

      go for the drum only since they never changed it before, that line usually has developing cylinder problems also, but for now the drum is probably enough
      Life is a learning continuum...

        Comment

        • copyman
          Owner / Technician

          Site Contributor
          2,500+ Posts
          • Sep 2005
          • 4535
          #3
          Re: canon IR1023

          Thanks for the reply. Do I need to reset or calibrate anything after replacing the drum?

            Comment

            • Brian8506
              Service Manager

              Site Contributor
              1,000+ Posts
              • Feb 2009
              • 1658
              #4
              Re: canon IR1023

              No

                Comment

                • dan7777
                  Senior Tech

                  500+ Posts
                  • Dec 2012
                  • 680
                  #5
                  Re: canon IR1023

                  Originally posted by bipc
                  go for the drum only since they never changed it before, that line usually has developing cylinder problems also, but for now the drum is probably enough
                  I agree. Usually that is the most replaced part. Make sure optics are clean.

                    Comment

                    Previous template Next
                    Working...