please can someone help me how to remove itb from canon ir3100cn and clean inside. if possible video tutorial.
thank you
waiting for your reply
thank you
waiting for your reply
-
-
Re: error e0000070-0001
Been quite awhile since I did this but it comes out rt side. Remove rt door and fuser. In front remove drum and inner finisher. I think then u can remove itb cleaning assy from top. On rt side there are 2 screws holding in itb. This should get u started. If u are successful then remove belt from assy and clean inside belt especially white patch on inside edge of belt. Make sure u put the belt back on the same way so it reads the white patch for home posit ion of belt. Good luck!! -
Re: error e0000070-0001
You've just reminded me what an aufull m/c this was, nearly an hour to get the transfer belt out especially with the internal finisher.
Only got one of this series left on contract, they mainly use it for b/w so its surprisingly reliable!Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Comment
Comment