Bizhub 600 will not print? Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • fixthecopier
    replied
    Re: Bizhub 600 will not print? Question

    When it was new that chip was around $2500. I sold one to a customer.

    Leave a comment:


  • Jag_97470
    replied
    Re: Bizhub 600 will not print? Question

    Awesome! Thank you guys for your time.

    Leave a comment:


  • blackcat4866
    replied
    Re: Bizhub 600 will not print? Question

    If you can still find it, it's called an IC202 PCL/PS image controller

    You can get this sort of information from the brochure, like this: http://www.clinesbe.com/brochures/bizhub%20600.pdf
    =^..^=

    Leave a comment:


  • iceman490
    replied
    Re: Bizhub 600 will not print? Question

    The print eprom was optional

    Leave a comment:


  • Jag_97470
    replied
    Re: Bizhub 600 will not print? Question

    Thank you sir; Do you know if this was an option or came standard on the board? Just wondering if it is standard maybe the chip is corrupt. It sounds like to me it must of been an option. Thank you again for the reply.

    Leave a comment:


  • iceman490
    replied
    Re: Bizhub 600 will not print? Question

    I cant recall the model number for the eprom chip but the 600 750/601 751 does require an eprom chip to print

    Leave a comment:


  • Jag_97470
    started a topic Bizhub 600 will not print? Question

    Bizhub 600 will not print? Question

    Hello everyone, strange problem; This copier has never printed, customer only copied, copier only at 150K. Customer moved copier to another office that they now want to print. All network settings seem ok, so I hooked up laptop to test. From laptop as seen from PC I can ping ok, can access UI ok, but it will not print! no data light ever comes on. I did notice there are tabs missing, for example; no tab for configuration printout, no Printer tab! You can view all IP setting and network is turned on. Another tech I called seems to remember a small 4 pin print eprom on the main board? I don't know if this is true. Just wanted to run this by you guys and what do you think? Thanks guys!
Working...