[CQ] DU-105 vs DU-106

[axel]

This two drums are the same.they have the same material safety data sheet.
Is there any one that had tried to instal in konica c1060l drum du-105?

[andyf424]

Re: DU-105 vs DU-106

I too have asked myself this same question. Curious if anyone has done it though. Kinda like the du-102's somebody had to try a du-104 to find out they work.

[Bizhub]

Re: DU-105 vs DU-106

Snap the pin off and it will fit and work


drum 2.jpg

[ragnarok]

Re: DU-105 vs DU-106

Snap the pin off and it will fit and work


[ATTACH=CONFIG]31647[/ATTACH]

Hello! Can you please post a bigger image ... can't find the bloody pin...

[Toxic]

Re: DU-105 vs DU-106

Hi,
Somebody figure out what is different between DU-105 and DU-106 and will DU-105 work on C1060L?

[Tech Helpdesk]

Re: DU-105 vs DU-106

Hello! Can you please post a bigger image ... can't find the bloody pin...

If you look at the image closely you will see a hole at 10 'o' clock that is where the pin used to be, by removing the pin you can use the drums on C1060l no problem.

[mariuscmr]

I just swapped 3 OPC drums from DU-104 to DU-106. I put OPC drum from C6500 to C3070L without any problem. They fit perfectly at half the price. And less than half of lifespan, as well. DU-104 has 180 000 clicks, while DU-106 has 460 000. But it was an emergency and I had spare parts.