BIZHUB C220 WON'T PRINT...is 'LIFE LIMIT' indicator causing this?

[copier tech]

Re: BIZHUB C220 WON'T PRINT...is 'LIFE LIMIT' indicator causing this?

It doesnt really matter. Personally i'd turn the machine off & replace them all in one go. Machine will calibrate it's self

[Synthohol]

Re: BIZHUB C220 WON'T PRINT...is 'LIFE LIMIT' indicator causing this?

Machine will stabilize but not calibrate itself.
Once everything is installed run background data reset and stabilize.
Then run all your gradations 3 times like it says in the manual.
Thats how its calibrated, not by itself.

[TEKK09]

Re: BIZHUB C220 WON'T PRINT...is 'LIFE LIMIT' indicator causing this?

Machine will stabilize but not calibrate itself.
Once everything is installed run background data reset and stabilize.
Then run all your gradations 3 times like it says in the manual.
Thats how its calibrated, not by itself.

Excellent. Just what I was asking for.
I see stabilize and gradation adjustments on page 385/6.
When you say, 'run background data reset', are you referring to the adjustment on page 387, "12.6.3 Image Background Adj"? And if so, do I input '0' on all the colors (because that's the default)? Thanks a lot!

[Synthohol]

Re: BIZHUB C220 WON'T PRINT...is 'LIFE LIMIT' indicator causing this?

no, in image adjustment in svc there is a button for stabilization mode. choose the one on the left and hit start. then bounce out once and choose gradations. run stabilize then you can choose print and the paper size. run it 3 times for copy and 3 times for print.

[TEKK09]

Re: BIZHUB C220 WON'T PRINT...is 'LIFE LIMIT' indicator causing this?

no, in image adjustment in svc there is a button for stabilization mode. choose the one on the left and hit start. then bounce out once and choose gradations. run stabilize then you can choose print and the paper size. run it 3 times for copy and 3 times for print.

Okay think I got it now. Sure appreciate the help!