c220

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CrapAimer
    Trusted Tech

    250+ Posts
    • Jan 2010
    • 296
    #1

    c220

    Hi All

    Have a C220 which keeps selecting A5 from top tray, have changed the board,fingers and sensor in the back, Tray seems fine, any help appreciated

    Thanks
    George
    Tags: None
    • EarthKmTech
      Step aside, noob

      1,000+ Posts
      • May 2009
      • 2139
      #2
      Re: c220

      Originally posted by CrapAimer
      Hi All

      Have a C220 which keeps selecting A5 from top tray, have changed the board,fingers and sensor in the back, Tray seems fine, any help appreciated

      Thanks
      George
      What about the photo sensors on the black plastic block that is spring loaded and has the side guide shaft slide into?

      I've had the back guide itself bent back so the shaft misses the sensors.

        Comment

        • acusso1234
          Tecnico

          250+ Posts
          • Dec 2008
          • 250
          #3
          Re: c220

          Sometimes helps regulating the two screws into the slotted holes under the paper contained in the cassette.
          ... In the minute that you're thinking of giving up, think about why you lasted so long ...

            Comment

            • habik
              Service Manager

              Site Contributor
              1,000+ Posts
              • Apr 2010
              • 2013
              #4
              Re: c220

              As EarthKM Tech suggested have a closer look on that sesor bracket they tend to crack on the long stepscrew!


              Sent from my iDon't believe in marketing device using Tapatalk
              .OK Google! ... will I need Berrocca this morning?
              Firmwares HERE

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22932
                  #5
                  Re: c220

                  Originally posted by habik
                  As EarthKM Tech suggested have a closer look on that sesor bracket they tend to crack on the long stepscrew!


                  Sent from my iDon't believe in marketing device using Tapatalk
                  I'm glad to see that you're back, habik. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • Bilal
                      #6
                      Re: c220

                      can anyone tell me how can i turn off my finisher as my paper is jamming there and i don't have any use of it though.

                        Comment

                        • Woxner
                          Senior Tech

                          500+ Posts
                          • Jul 2011
                          • 826
                          #7
                          Re: c220

                          just unplug the finisher then turn machine back on. agree check metal lever are not bent

                            Comment

                            • blackcat4866
                              Master Of The Obvious

                              Site Contributor
                              10,000+ Posts
                              • Jul 2007
                              • 22932
                              #8
                              Re: c220

                              1) power must be off first
                              2) Unplug bridge from finisher, and finisher from back cover.
                              3) Remove bridge.
                              4) power ON.

                              =^..^=
                              If you'd like a serious answer to your request:
                              1) demonstrate that you've read the manual
                              2) demonstrate that you made some attempt to fix it.
                              3) if you're going to ask about jams include the jam code.
                              4) if you're going to ask about an error code include the error code.
                              5) You are the person onsite. Only you can make observations.

                              blackcat: Master Of The Obvious =^..^=

                                Comment

                                • allan
                                  RTFM!!

                                  5,000+ Posts
                                  • Apr 2010
                                  • 5459
                                  #9
                                  Re: c220

                                  Its one of my boot stock items. Called "Holder" as per description.
                                  Whatever

                                    Comment

                                    Previous template Next
                                    Working...