BizHub Pro c6500 problem pawer

[liondor1969]

Hallo

I have a konica minolta BizHub Pro c6500 that wont power up...
i have a problem with and I have a yellow pollution in waves,if you print something white, is seen as a dirt

I tried another drive laser, the result is the same,I cleaned cylinders, less transfer belt

please help my :-)

[Synthohol]

Re: BizHub Pro c6500 problem pawer

I think I need a translator.
Which is it, wont power up or a copy quality issue?
Im sorry but your post and link are contradictory and need to be explained.
Thanks.

[liondor1969]

Re: BizHub Pro c6500 problem pawer

my BizHub Pro c6500 does not start..no PAWER..not feed supply :-) is dead

I think I need a translator.
Which is it, wont power up or a copy quality issue?
Im sorry but your post and link are contradictory and need to be explained.
Thanks.

[mircea]

Re: BizHub Pro c6500 problem pawer

Hallo

I have a konica minolta BizHub Pro c6500 that wont power up...
i have a problem with and I have a yellow pollution in waves,if you print something white, is seen as a dirt

I tried another drive laser, the result is the same,I cleaned cylinders, less transfer belt

please help my :-)

hello
Try to check in the back of your printer for a white fuse on the power supply board
all printers should have a 5-6A fuse to prevent board from burning

take care