kinica c284

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • uzicomp
    Technician
    • Feb 2015
    • 35

    #1

    kinica c284

    Hey
    I need help reset the digital counter of c284
  • Alex1
    Trusted Tech

    Site Contributor
    250+ Posts
    • Oct 2012
    • 285

    #2
    Re: kinica c284

    Originally posted by uzicomp
    Hey
    I need help reset the digital counter of c284
    Do you mean the meter reading???

    Comment

    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009

      #3
      Re: kinica c284

      Pull SSD board, place on hard surface, strike with hammer, replace SSD board. This is a much easier process than trying to re write the SSD board or clear the contents and you will get the same "boat anchor" results with less headaches. Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

      Comment

      • Synthohol
        Certified Konica Expert

        Site Contributor
        5,000+ Posts
        • Mar 2016
        • 5847

        #4
        Re: kinica c284

        Originally posted by emujo
        Pull SSD board, place on hard surface, strike with hammer
        putting the ssd board in the microwave for 15 seconds works better
        We know a thing or two because we've seen a thing or two.
        The medication helps though...

        Comment

        • uzicomp
          Technician
          • Feb 2015
          • 35

          #5
          Re: kinica c284

          it is reset the digital counter of c284?

          Comment

          • uzicomp
            Technician
            • Feb 2015
            • 35

            #6
            Re: kinica c284

            Originally posted by Synthohol
            putting the ssd board in the microwave for 15 seconds works better


            Very funny
            If you do not have anything clever to say then it is better to keep quiet

            Comment

            • Alex1
              Trusted Tech

              Site Contributor
              250+ Posts
              • Oct 2012
              • 285

              #7
              Re: kinica c284

              Originally posted by uzicomp
              it is reset the digital counter of c284?
              You can't reset the digital counter

              Comment

              • Synthohol
                Certified Konica Expert

                Site Contributor
                5,000+ Posts
                • Mar 2016
                • 5847

                #8
                Re: kinica c284

                it's totally immoral and in some places illegal.
                like turning back the odometer of a car for sale.
                this is why we all will make fun of this request.
                We know a thing or two because we've seen a thing or two.
                The medication helps though...

                Comment

                • allan
                  RTFM!!

                  5,000+ Posts
                  • Apr 2010
                  • 5462

                  #9
                  Re: kinica c284

                  You could try using whiteout on the touch screen?
                  Whatever

                  Comment

                  • uzicomp
                    Technician
                    • Feb 2015
                    • 35

                    #10
                    Re: kinica c284

                    Originally posted by Synthohol
                    it's totally immoral and in some places illegal.
                    like turning back the odometer of a car for sale.
                    this is why we all will make fun of this request.
                    I do not intend to cheat someone
                    When I rent a client machine
                    I wanted to charge him to begin meter counter to 0

                    Comment

                    • uzicomp
                      Technician
                      • Feb 2015
                      • 35

                      #11
                      Re: kinica c284

                      Originally posted by allan
                      You could try using whiteout on the touch screen?
                      nop

                      Comment

                      • Kidaver
                        Ghoulscout

                        500+ Posts
                        • Apr 2011
                        • 912

                        #12
                        Re: kinica c284

                        reset meter.jpg
                        "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

                        Comment

                        • kingarthur
                          Service Manager

                          1,000+ Posts
                          • Feb 2008
                          • 1369

                          #13
                          Re: kinica c284

                          Reverse the polarity of the motors, fill up the exit tray & run it backwards.......
                          Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

                          Comment

                          • uzicomp
                            Technician
                            • Feb 2015
                            • 35

                            #14
                            Re: kinica c284

                            Originally posted by kingarthur
                            Reverse the polarity of the motors, fill up the exit tray & run it backwards.......

                            How I did not think about it you're a genius

                            Comment

                            • allan
                              RTFM!!

                              5,000+ Posts
                              • Apr 2010
                              • 5462

                              #15
                              Re: kinica c284

                              Originally posted by kingarthur
                              Reverse the polarity of the motors, fill up the exit tray & run it backwards.......
                              How on earth are you going to separate the color toner?
                              Whatever

                              Comment

                              Working...