Oce variolink 4522c (Bizhub C452) displays error "no animation guide available"

[Guest]

Hello. I am new to this forum. I've just bought an used bizhub C452 (re-branded OCE 4522c) with IC-412 fiery and fs-527 finisher. The copier displays error "no animation guide available" and keeps flashing the warning light.
Could someone give me the firmware for this model ? I know I'm asking a little too much, as a newcomer on this forum, but any help would be greatly appreciated. From what I've read on another thread, "KM didn't do proprietary Oce firmware on this model or the 5522c/6522c......... Oce VL4522C/5522C/6522C uses the standard Bizhub C452/552/652 firmware" (user mitchl)
Thank you in advance !

[allan]

Re: Oce variolink 4522c (Bizhub C452) displays error "no animation guide available"

Its not a firmware problem.
You need the movie data.
It loads from service mode.
Unfortunately can't give that away.

You loose it if you format the HDD.

[Woxner]

Re: Oce variolink 4522c (Bizhub C452) displays error "no animation guide available"

send me a message if you still need it