konica security lines

[DPSolutions]

Hi,
it is possible to eliminate the safety lines on konica machine
perhaps changing some swicth or a firmware?

thanks
Hello, it is possible to eliminate the safety lines on konica machine, perhaps changing some swicth or a firmaware appropriate?

[Synthohol]

Re: konica security lines

just follow the setup procedure correctly step by step.

[Cookr]

Re: konica security lines

Yep follow the set up completely work on a machine not too long ago and all I need to do was put in the serial number for the ADF in and restarted worked fine after. Good Luck

[DPSolutions]

Re: konica security lines

The machine is a C220, with 100000 copies.Suddenly it started doing this problem.
The machine is a C220, with 100000 copies.Suddenly it started doing this problem.

[CraigW]

Re: konica security lines

just follow the setup procedure correctly step by step.

^^^^ 1st thing I would try.

[TheBlueOrleans]

Re: konica security lines

The machine is a C220, with 100000 copies.Suddenly it started doing this problem.

First, what is your definition of "security lines"?

Second, what has been done to this machine in its past 100,000 pages of output? What has been replaced and/or modified?

Third, are the "security lines" any specific color, or are they random colors? If the lines are cyan or magenta only, I would also suspect the setup procedure had been done incorrectly, however I cannot explain the reason this would suddenly begin after a usage of approximately 100,000 pages.

Fourth, was the machine wiped completely, HDD formatted, NVRAM replaced or removed (if present to begin with)?

Fifth, please consider uploading an image of the lines you refer to, so we can better provide assistance to you.

[blackcat4866]

Re: konica security lines

We call them the "Lines Of Shame".

[DPSolutions]

Re: konica security lines

First, what is your definition of "security lines"?

Second, what has been done to this machine in its past 100,000 pages of output? What has been replaced and/or modified?

Third, are the "security lines" any specific color, or are they random colors? If the lines are cyan or magenta only, I would also suspect the setup procedure had been done incorrectly, however I cannot explain the reason this would suddenly begin after a usage of approximately 100,000 pages.

Fourth, was the machine wiped completely, HDD formatted, NVRAM replaced or removed (if present to begin with)?

Fifth, please consider uploading an image of the lines you refer to, so we can better provide assistance to you.

SKMBT_C25317011908530.pdf

It was changed the black drum and the transfer belt.
The lines are only cyan and magenta.
I tried to do a data initialization.

[Synthohol]

Re: konica security lines

just follow the setup procedure correctly step by step.

data initialization wont stop the lines, just simply follow the initial setup procedure and the lines will go away.

[blackcat4866]

Re: konica security lines

data initialization wont stop the lines, just simply follow the initial setup procedure and the lines will go away.

He's not listening. =^..^=

[DPSolutions]

Re: konica security lines

I solved this way:
before I reset the NVRAM with the proper firmware then I performed the installation

[tulintron]

Re: konica security lines

just follow the setup procedure correctly step by step.

Yep follow the set up completely work on a machine not too long ago and all I need to do was put in the serial number for the ADF in and restarted worked fine after. Good Luck

Hi,
it is possible to eliminate the safety lines on konica machine
perhaps changing some swicth or a firmware?

thanks
Hello, it is possible to eliminate the safety lines on konica machine, perhaps changing some swicth or a firmaware appropriate?

^^^^ 1st thing I would try.

First, what is your definition of "security lines"?

Second, what has been done to this machine in its past 100,000 pages of output? What has been replaced and/or modified?

Third, are the "security lines" any specific color, or are they random colors? If the lines are cyan or magenta only, I would also suspect the setup procedure had been done incorrectly, however I cannot explain the reason this would suddenly begin after a usage of approximately 100,000 pages.

Fourth, was the machine wiped completely, HDD formatted, NVRAM replaced or removed (if present to begin with)?

Fifth, please consider uploading an image of the lines you refer to, so we can better provide assistance to you.

We call them the "Lines Of Shame".

data initialization wont stop the lines, just simply follow the initial setup procedure and the lines will go away.

[ATTACH]35302[/ATTACH]

It was changed the black drum and the transfer belt.
The lines are only cyan and magenta.
I tried to do a data initialization.

He's not listening. =^..^=

Hello everyone.I have a Bizhub C8000 that some technician put another NVRam just for testing and when it came back to the original NVRam for some inexplicable reason the machine started to present these lines, alternating between cyan and magenta.

I did the installation procedure, but I did not succeed.

Note that in the Serial Number / Main Body, the field is open, and you can enter another serial number, as in the accessories.

Can anybody help me?

Thanks for All!

[Phil B.]

Re: konica security lines

Hello everyone.I have a Bizhub C8000 that some technician put another NVRam just for testing and when it came back to the original NVRam for some inexplicable reason the machine started to present these lines, alternating between cyan and magenta.
I did the installation procedure, but I did not succeed.
Note that in the Serial Number / Main Body, the field is open, and you can enter another serial number, as in the accessories.
Can anybody help me?
Thanks for All!

if the serial # field is blank .. you have NOT done init properly
the lines are due to improper installation .. " lines of shame"

[Phil B.]

Re: konica security lines

Hello everyone.I have a Bizhub C8000 that some technician put another NVRam just for testing and when it came back to the original NVRam for some inexplicable reason the machine started to present these lines, alternating between cyan and magenta.

I did the installation procedure, but I did not succeed.

Note that in the Serial Number / Main Body, the field is open, and you can enter another serial number, as in the accessories.

Can anybody help me?

Thanks for All!

and PLEASE next time START YOUR OWN THREAD! piggybacking onto a thread may not even be seen since DP had fixed his issue.

[tulintron]

Re: konica security lines

if the serial # field is blank .. you have NOT done init properly
the lines are due to improper installation .. " lines of shame"

The field is not empty. The serial number is entered.


However, the field is open, so I can enter any valid serial number.
The equipment was with the meter above 2M and, for unexplained reason appeared zero, without serial number, when inserted to the equipment again.


I performed the installation procedure of the equipment according to the installation manual of konica minolta, but without result.


This is an isolated case, rare to happen. I'm losing sleep over this.


I need a lot of help.


Thanks.