Difference between KM 1100 pro and KM 1100 press , KM 1052?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • BOTOY
    Technician
    • May 2016
    • 46
    #1

    Difference between KM 1100 pro and KM 1100 press , KM 1052?

    Hi,

    We are looking to buy black and white machine. We hesitate between KM 1052 and KM 1100.
    Also there is two type of machine in both of them. Press version and Pro version so what is the difference?
    Main body and print engine are the same?

    Which is best machine ? we print book, bill and also on 350g paper.
    Thanks,
    Tags: None
    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5737
      #2
      Re: Difference between KM 1100 pro and KM 1100 press , KM 1052?

      both machines are capable of 350gsm paper however it must be pulled from a PF cabinet.

      Specs:

      BH1250/1052
      40 to 350 g/m2 (Only available for middle tray of PF-703 and PF-706)

      BH1100
      40 to 350 gsm (Only available for middle tray of PF-709)


      We know a thing or two because we've seen a thing or two.
      The medication helps though...

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22930
          #3
          Re: Difference between KM 1100 pro and KM 1100 press , KM 1052?

          Keep in mind that 350 gsm is the heaviest possible media. It's fully possible that neither machine will feed this media consistently. If it were me, I would do two things. I'd buy a couple of cases of this media and run it through the machine you desire before you buy it. If you have any success at all, then I would select a lighter weight media for the majority of the printing. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • BOTOY
              Technician
              • May 2016
              • 46
              #4
              Re: Difference between KM 1100 pro and KM 1100 press , KM 1052?

              Thinks for your quick reply.

              Are there any difference between pro version and press version?
              The version are the same?

              Also which is more reliable? 1100 or 1052?
              Thanks,

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22930
                  #5
                  Re: Difference between KM 1100 pro and KM 1100 press , KM 1052?

                  They're all the same basic engine. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • BOTOY
                      Technician
                      • May 2016
                      • 46
                      #6
                      Re: Difference between KM 1100 pro and KM 1100 press , KM 1052?

                      So we should by KM 1100 pro version because it's more cheaper than 1052.
                      In the offer price we received, main engine of 1052 press version is 30% more expensive than main engine of 1100 pro version.

                        Comment

                        • BOTOY
                          Technician
                          • May 2016
                          • 46
                          #7
                          Re: Difference between KM 1100 pro and KM 1100 press , KM 1052?

                          Hi,

                          Finally we buy KM 1100 pro black machine with PF709 feeder.
                          But on light weight under 60g, machine jam and we can't print any sheet.
                          also we try to print on brown craft 55g, machine jam and no way to print on it.
                          The same issue on NCR carbonless paper weight 57g.

                          All jam occur betwen drum and fusion unit, paper don't go under fusing unit, it seem that drum electrostatic catch paper and make it jam.

                          Any idea to fix this issue, we try this paper on our C1085 and it work well no jam.

                          Thanks,

                            Comment

                            • blackcat4866
                              Master Of The Obvious

                              Site Contributor
                              10,000+ Posts
                              • Jul 2007
                              • 22930
                              #8
                              Re: Difference between KM 1100 pro and KM 1100 press , KM 1052?

                              According to the brochure any of the trays claim to handle 40 gsm media ... but intuitively that's just ridiculous.
                              I can't imagine anything less than 60gsm feeding successfully. Did you try this or any other media before purchasing the machine? Have you increased separation pressure? What jam codes? =^..^=
                              If you'd like a serious answer to your request:
                              1) demonstrate that you've read the manual
                              2) demonstrate that you made some attempt to fix it.
                              3) if you're going to ask about jams include the jam code.
                              4) if you're going to ask about an error code include the error code.
                              5) You are the person onsite. Only you can make observations.

                              blackcat: Master Of The Obvious =^..^=

                                Comment

                                Previous template Next
                                Working...