Hello I am getting a 7217 jam code when printing on BH360 with FS-529 installed. When I removed the finisher the machine works fine. Any suggestions
-
-
Re: 7217 jam code BH C360
The FS-529 is fairly similar to the FS-534. Maybe this will help. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: 7217 jam code BH C360
BC, your mod was awesome, i ez'd out with a transparency i cut and used nito tape.
yours will last, mine gets me out of the "callback" range.We know a thing or two because we've seen a thing or two.
The medication helps though...Comment
-
Re: 7217 jam code BH C360
Thanks.
The first machine with the mod has passed 2M now, and I haven't touched the finisher in over a year. I've got 5 or 6 with the mod now. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment