Bizhub c 360 no display

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • smiley
    Senior Tech

    500+ Posts
    • Aug 2008
    • 615

    #1

    Bizhub c 360 no display

    Good day guys i have this machine that has no display only the blue color led light and orange start button appear on the control panel. I try to clean the ram and replace it but never change. Any one incounter this can help me what i have to do next.please.
    there is no glory without sacrifice
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4765

    #2
    Re: Bizhub c 360 no display

    Try updating firmware. Also could be bad NVRAM.

    Comment

    • REGSIS
      Trusted Tech

      250+ Posts
      • May 2016
      • 435

      #3
      Re: Bizhub c 360 no display

      When you turn ON the machine (main power and sub power) does the machine warm up normaly?
      Can you print?

      I had only one problem like this and after replacing DVI cable it was all normal again.
      Also you can try switch control panel from another machine. It's easy.

      Comment

      • smiley
        Senior Tech

        500+ Posts
        • Aug 2008
        • 615

        #4
        Re: Bizhub c 360 no display

        Hi guys this machine dosnt boot up or warm up. I try to replace the ram. Butit dosn't work.
        there is no glory without sacrifice

        Comment

        • Zesti
          Trusted Tech

          250+ Posts
          • Jun 2009
          • 309

          #5
          Re: Bizhub c 360 no display

          Re-flash the machine.
          Was there any power surge?

          Comment

          • smiley
            Senior Tech

            500+ Posts
            • Aug 2008
            • 615

            #6
            Re: Bizhub c 360 no display

            good day guys just an update to this problem i replace the prcb still no good then replace mfp board with the new ram. still doesnt boot up. only orange color on start button turns on.
            there is no glory without sacrifice

            Comment

            • smiley
              Senior Tech

              500+ Posts
              • Aug 2008
              • 615

              #7
              Re: Bizhub c 360 no display

              Originally posted by REGSIS
              When you turn ON the machine (main power and sub power) does the machine warm up normaly?
              Can you print?

              I had only one problem like this and after replacing DVI cable it was all normal again.
              Also you can try switch control panel from another machine. It's easy.


              friend can you please help me where i can see this dvi cable? thanks
              there is no glory without sacrifice

              Comment

              • Techlife
                Technician
                • Mar 2015
                • 27

                #8
                Re: Bizhub c 360 no display

                Originally posted by smiley
                dvi cable? thanks
                White cable that runs from machine to the display panel

                Comment

                • smiley
                  Senior Tech

                  500+ Posts
                  • Aug 2008
                  • 615

                  #9
                  Re: Bizhub c 360 no display

                  thanks techlife i will try to replace it.
                  there is no glory without sacrifice

                  Comment

                  • EarthKmTech
                    Step aside, noob

                    1,000+ Posts
                    • May 2009
                    • 2139

                    #10
                    Re: Bizhub c 360 no display

                    Originally posted by smiley
                    thanks techlife i will try to replace it.
                    just plug it in directly between the panel and mfp external socket to test if its the problem. If it doesnt work you just saved a hell of a lot of work for nothing.

                    Comment

                    • smiley
                      Senior Tech

                      500+ Posts
                      • Aug 2008
                      • 615

                      #11
                      Re: Bizhub c 360 no display

                      guys are the control panel of 360 are same with 451?
                      there is no glory without sacrifice

                      Comment

                      • REGSIS
                        Trusted Tech

                        250+ Posts
                        • May 2016
                        • 435

                        #12
                        Re: Bizhub c 360 no display

                        Originally posted by smiley
                        guys are the control panel of 360 are same with 451?
                        Could be.

                        If you have time you can take both apart to check if there's any differences.

                        I only know that coltrol panels from c360 series and 423 series are not entirely same, but that doesn't mean that they don't work on different model.

                        I think that you can do no harm if you try panel of 451 on c360. The worst thing it can happen is that panel would not work properly, or hang up.

                        On the other hand they might be excatly the same. You can check part number in both manuals if they match.

                        Comment

                        • Albonline
                          Service Manager

                          1,000+ Posts
                          • Sep 2008
                          • 1153

                          #13
                          Re: Bizhub c 360 no display

                          Originally posted by smiley
                          guys are the control panel of 360 are same with 451?
                          A02EM70001 BH C253/C550/C650/C451

                          A0P0M70603 C220,280,360

                          A0P0M70603 B223/423/360/c452

                          Comment

                          Working...