If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I agree they are workhorses. I had a lot of these out there (prob 40) at one time. When they started to have issues with new OS's, etc I started upgrading them.
Upgraded most to the Biz 223 (very similar footprint). You know it is a good machine when K/M keeps that same footprint. Well with one exception, the Di5510, etc. This machine was one of the worse and they kept it all the way through the Biz 601! Don't get me started !!!
I agree they are workhorses. I had a lot of these out there (prob 40) at one time. When they started to have issues with new OS's, etc I started upgrading them.
Upgraded most to the Biz 223 (very similar footprint). You know it is a good machine when K/M keeps that same footprint. Well with one exception, the Di5510, etc. This machine was one of the worse and they kept it all the way through the Biz 601! Don't get me started !!!
I agree they are workhorses. I had a lot of these out there (prob 40) at one time. When they started to have issues with new OS's, etc I started upgrading them.
Upgraded most to the Biz 223 (very similar footprint). You know it is a good machine when K/M keeps that same footprint. Well with one exception, the Di5510, etc. This machine was one of the worse and they kept it all the way through the Biz 601! Don't get me started !!!
yeah got a customer with 3 of these and all of them are just into the 1 million page count. mind you the fuser in the 223 is total junk. have had to replace these way way way before life due to sep fingers cutting into the rollers
Comment