bizhub 420 flashing LED ethernet port

[libmar]

Hello to all
I have this situation on my photocopier I have updated the firmware (thanks to Synthohol a great one) but I have not solved the problem.
according to you which can be the cause?

[Gift]

Re: bizhub 420 flashing LED ethernet port

Does it flash even if there is no network cable plugged in?

If not - try connecting direct to your notebook via crossover cable to bypass the customers network enviroment.

[libmar]

Re: bizhub 420 flashing LED ethernet port

no

I try and let you know

ps I verified that not even the USB and parallel port work
the PC does not reveal any photocopier

[libmar]

Re: bizhub 420 flashing LED ethernet port

no ... they always flash and the copier will not connect

[tech51]

Re: bizhub 420 flashing LED ethernet port

What was the original fault that caused you to update the firmware?
Did it print before the update?
Also, what colour are the lights on the port?

[Phil B.]

Re: bizhub 420 flashing LED ethernet port

sounds to me that your IP addy doesn't match the network scheme...

but it's really hard to diagnose due to the LACK of INFORMATION GIVEN.

[blackcat4866]

Re: bizhub 420 flashing LED ethernet port

It would help a lot to know what it is you are trying to fix.

If the problem is that you cannot print ... do you have the print server option? =^..^=

[rrrohan]

[libmar]

Re: bizhub 420 flashing LED ethernet port

What was the original fault that caused you to update the firmware?
Did it print before the update?
Also, what colour are the lights on the port?

for a period of time the copier after switching on the leds flashed and it took more than half an hour to connect to the network I thought it was a firmware problem and I reinstalled the firmware but the problem persists and now does not connect to the network the ip address is all ok I checked on the copier panel all the parameters are ok but the leds of the network card flash green and orange alternately

which pins?

[rrrohan]

Re: bizhub 420 flashing LED ethernet port

network port pins

[libmar]

Re: bizhub 420 flashing LED ethernet port

this bizhup 420 is crazy
this morning the copier came out with the error c-c183
I used the program isw for the firmware but it locks both with USB and parallel cable I do not know what to do
I am attaching photos
if anyone has any ideas, please come forward thanks

[kenpio]

Re: bizhub 420 flashing LED ethernet port

Was not there a chip that was installed in the main board to enable it to print? I think it was called IC-204. Can you print a test print from the copier?

KEN

[libmar]

Re: bizhub 420 flashing LED ethernet port

in chips there is ... the photocopier is locked for c-c183 error

[kenpio]

Re: bizhub 420 flashing LED ethernet port

C-C183 The machine type mentioned in
the software is different between
the overall control and the image
control.

[libmar]

Re: bizhub 420 flashing LED ethernet port

Resolved
it was the network cable ... it worked on other PC and printers mind on the konica no

changed bizhub network cable started working
ps last question (then no more stress :-))
what is the latest firmware for bizhub 420?
thank you