Konica Minolta c252

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mamqa
    • May 2025

    #1

    Konica Minolta c252

    Hello! I have an C252, but an problem.

    When i start te MFP the hour glass just shows up, and after multiple on/off on main switch the machine starts. I have re-setted machine but no change. So, can an reflash/update of the firmwire fix this? Do sombody have firmwire and tool for this job?
    Thanks.
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4528

    #2
    Re: Konica Minolta c252

    Firmware could fix this but first you should try formatting the hard drive, or replacing. Also could try new Ram.

    For firmware update you need a 128mb compact flash card ("UN"formatted), Kon/Min imaging toolkit, and latest firmware.

    I have hard drive and memory if you end up needing them. Or if you ever need anything else I have 2 working very low meter C250/252 for parts.

    Comment

    • mamqa

      #3
      Re: Konica Minolta c252

      Thank you for Answer.

      The harddrive is formatted and deactivated. I have plans to try new RAM. But want to try Firmwmare update first, do you have the toolkit and file?


      Originally posted by copyman
      Firmware could fix this but first you should try formatting the hard drive, or replacing. Also could try new Ram.

      For firmware update you need a 128mb compact flash card ("UN"formatted), Kon/Min imaging toolkit, and latest firmware.

      I have hard drive and memory if you end up needing them. Or if you ever need anything else I have 2 working very low meter C250/252 for parts.

      Comment

      • copyman
        Owner / Technician

        Site Contributor
        2,500+ Posts
        • Sep 2005
        • 4528

        #4
        Re: Konica Minolta c252

        PM me with your email. I can send you F/W file but don't think I have the toolkit. Maybe you can find on google?

        Comment

        • mamqa

          #5
          Re: Konica Minolta c252

          You got PM 😊

          Originally posted by copyman
          PM me with your email. I can send you F/W file but don't think I have the toolkit. Maybe you can find on google?

          Comment

          Working...