Bizhub 185 Interesting printout issue

[Obtex]

Re: Bizhub 185 Interesting printout issue

its only 10k

[Obtex]

Re: Bizhub 185 Interesting printout issue

Looks to me like a transfer belt and transfer roller issue. I had this same problem with a CS 400ci. Check to make sure that the transfer belt and roller are in contact with each other. It could be that the transfer roller guide on the transfer belt might be amiss...

This model doesnt have a transfer belt, it has only a transfer roller wich i allready replaced with a new one.

Can someone tell me how or where to check the voltages ?

[Obtex]

Re: Bizhub 185 Interesting printout issue

Bump

[Phil B.]

Re: Bizhub 185 Interesting printout issue

Bump

this site doesn't do anything special when you " bump" a thread

[allan]

Re: Bizhub 185 Interesting printout issue

Make really sure the transfer voltage is getting to the transfer roller.
So its not making all black prints??

[Phil B.]

Re: Bizhub 185 Interesting printout issue

Can someone tell me how or where to check the voltages ?

how do you normally check voltages?

on transfer you would read it from the contacts to frame

[michas778]

Re: Bizhub 185 Interesting printout issue

Hello,
if the problem was solved please write what caused that problem.

Regards,
M.

[Obtex]

Re: Bizhub 185 Interesting printout issue

The issue was not solved, client was not keen on waiting and bought another one