konica minolta c3110 with an fbob code

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • brent
    Service Manager

    Site Contributor
    1,000+ Posts
    • Nov 2008
    • 1183
    #1

    konica minolta c3110 with an fbob code

    weird code. but the manual said it was an abort code this machine has been problematic
    from the beginning.. when it had any code on it. we had to unplug it let it sit and it would come back
    on usually with no lights on the display any thoughts on this or the fbob code?

    thanks guys very much

    brent
    Tags: back, code, fbob
    • tech51
      Senior Tech

      500+ Posts
      • Jan 2009
      • 846
      #2
      Re: konica minolta c3110 with an fbob code

      Update the firmware to the latest. That should cure it.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22703
          #3
          Re: konica minolta c3110 with an fbob code

          Firmware is at release 1 controller (A6DT30G0116-999) and scan (A6DT23G0101-999), or release 2 controller (A6DT30G0204-999) and scan (A6DT23G0101-999).

          The bug is fixed in firmware to release 3 controller (A6DT30G0304-999) and scan (A6DT23G0300). Firmware is currently at release version 8, sub controller (A6DT30G0803-899), main controller (A6DT30G0C02-999), engine (A6DT0Y00050G001200_A), and scan (A6DT23G0402-999).

          If you've never done firmware on a bizhub C3100, It's a little different than the majority of bizhubs, and different from the Lexmark based printers. It does some unexpected things. I recommend that you read the README file that I put together before you do it. And please don't ask for the firmware. =^..^=
          Attached Files
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • B0265
              Senior Tech

              500+ Posts
              • Jan 2007
              • 718
              #4
              Re: konica minolta c3110 with an fbob code

              I've had this once. I tried the setting below but that only changed the indication from an error code to a jam. The solution for us was to change the ADF unit.

              SoftSW No.291
              = 0: Indicate FB0B as before.(Default)
              = 32: JAM is indicated instead of FB0B

                Comment

                • copier tech
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2014
                  • 7934
                  #5
                  Re: konica minolta c3110 with an fbob code

                  Originally posted by blackcat4866
                  Firmware is at release 1 controller (A6DT30G0116-999) and scan (A6DT23G0101-999), or release 2 controller (A6DT30G0204-999) and scan (A6DT23G0101-999).

                  The bug is fixed in firmware to release 3 controller (A6DT30G0304-999) and scan (A6DT23G0300). Firmware is currently at release version 8, sub controller (A6DT30G0803-899), main controller (A6DT30G0C02-999), engine (A6DT0Y00050G001200_A), and scan (A6DT23G0402-999).

                  If you've never done firmware on a bizhub C3100, It's a little different than the majority of bizhubs, and different from the Lexmark based printers. It does some unexpected things. I recommend that you read the README file that I put together before you do it. And please don't ask for the firmware. =^..^=
                  Thanks for the word doc very hady to read while waiting!

                  Out of interest does it matter what order I update the files? I have just done them in the order saved to usb.
                  Let us eat, drink, and be merry, because tomorrow we may die!

                  For all your firmware & service manual needs please visit us at:

                  www.copierfirmware.co.uk - www.printerfirmware.co.uk
                  ​

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22703
                      #6
                      Re: konica minolta c3110 with an fbob code

                      It's most important during the transition from a single controller file to the main controller and sub controller files.
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • jwai
                          Trusted Tech

                          250+ Posts
                          • May 2018
                          • 497
                          #7
                          Re: konica minolta c3110 with an fbob code

                          Originally posted by blackcat4866
                          Firmware is at release 1 controller (A6DT30G0116-999) and scan (A6DT23G0101-999), or release 2 controller (A6DT30G0204-999) and scan (A6DT23G0101-999).

                          The bug is fixed in firmware to release 3 controller (A6DT30G0304-999) and scan (A6DT23G0300). Firmware is currently at release version 8, sub controller (A6DT30G0803-899), main controller (A6DT30G0C02-999), engine (A6DT0Y00050G001200_A), and scan (A6DT23G0402-999).

                          If you've never done firmware on a bizhub C3100, It's a little different than the majority of bizhubs, and different from the Lexmark based printers. It does some unexpected things. I recommend that you read the README file that I put together before you do it. And please don't ask for the firmware. =^..^=
                          I have one machine with version 8 F/W, it displayed this code and reset it with power off/on main switch.

                            Comment

                            Previous template Next
                            Working...