hi guys, does anyone have a parts manual for the FS534 finisher. I have the 654e manual but it doesn't include accessories.
-
-
Re: FS534 parts
you will get a better response if posted in the correct forum:
-
Re: FS534 parts
What part numbers do you need? I brought in the external HDD this evening. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: FS534 parts
there is an entrance guide plate which is 2 pieces. the finisher came from a wholesaler and doesn't have the correct guide to allow paper from a 654e to go in properly.Comment
-
Re: FS534 parts
I think this is what you want:
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: FS534 parts
No it's the 2 piece metal entrance guide on the finisher itselfComment
-
Re: FS534 parts
guide plate a or b from setup instructions
A3EPIXC010DA guide a
A3EPIXC011DA guide b
one or the other of these go on the ru entrance depending on model. these are the numbers from the install manual, think there are real part numbers for these but am not finding them.Comment
-
Re: FS534 parts
I was wrong, it's not metal. plastic, pn A3EPPP3E01. FS527 was metal.
Thanks for all the input.Comment
Comment