5 "SharkFins" Dsiplayed

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copierwhisper
    Technician

    50+ Posts
    • Mar 2013
    • 78
    #1

    5 "SharkFins" Dsiplayed

    Konica Minolta C224e: The control panel displays 5 "SharkFins" and freezes. Is there any documentation out there that tells us what it means based on how many "fins" are displayed on the screen?
    Tags: based, displayed, screen, sharkfins
    • mincopier
      Trusted Tech

      250+ Posts
      • Dec 2015
      • 290
      #2
      Re: 5 "SharkFins" Dsiplayed

      Personally it has been my experience that when stuck at the fins/pilars it is the NVRAM. These are only available from Konicaminolta. Do not swap from another machine.

        Comment

        • Synthohol
          Certified Konica Expert

          Site Contributor
          5,000+ Posts
          • Mar 2016
          • 5463
          #3
          Re: 5 "SharkFins" Dsiplayed

          agreed, likely the SSD board.

          here is a doc explaining the pillars (shark fins)
          Attached Files
          We know a thing or two because we've seen a thing or two.
          The medication helps though...

            Comment

            • Woxner
              Senior Tech

              500+ Posts
              • Jul 2011
              • 808
              #4
              Re: 5 "SharkFins" Dsiplayed

              try reloading firmware. it has worked for me sometimes. it may just have lost its marbles

                Comment

                Previous template Next
                Working...