Re: Printing from Network to C350 causes printed error code
universal drivers are junk.
Download Centre | Support & Downloads - Business Products | KONICA MINOLTA
get the real PS/PCL driver.
Printing from Network to C350 causes printed error code
Collapse
X
-
Re: Printing from Network to C350 causes printed error code
Service mode, System 2(?), Controller Type, change back to Type 0. This should then allow both PS and PCL drivers to work using the onboard Empron controller. Of course the Fiery drivers will no longer work. You must use the correct driver.Leave a comment:
-
Re: Printing from Network to C350 causes printed error code
check your driver for a "auto color/full/b&w" check boxLeave a comment:
-
Re: Printing from Network to C350 causes printed error code
Answering my own post here -- installed a Generic PCL Printer driver from Mac and WHAM! It's printing black and white at least! Now -- how to get it to print color?Leave a comment:
-
Printing from Network to C350 causes printed error code
C350 that originally came with Fiery controller that recently stopped "Fiering" up.
Able to access web control panel and Print directly to C350 via IP address through the network, but it only prints the following:
"%!PS-Adobe-3.0 %APL_DSC_Encoding: UTF8 %APLProducer: (Version 10.13.4 (Build 17E199
followed by numerous blank pieces of paper.
Is there any way to print properly without the Fiery? If so, what adjustments do I need to make? Should I just buy a new Fiery?
Leave a comment: