konica c258 ce autentication

[tsbservice]

Re: konica c258 ce autentication

How about entering CE mode from the trouble reset screen you dont need to enter the password then enter enhanced security by pressing stop 0 C then turn off CE authentication.

Try this method be interested to see if it will work.

As far as I remember machine will be asking forr CE password, but I may be wrong.

[rrrohan]

Re: konica c258 ce autentication

i can confirm if CE password is enabled entering via trouble reset will still request password.

it would be security flaw if it did

if you can contact KM to reset password you will need to do following

At CE password screen press stop then clear

this will give you a token code to supply

[copier tech]

Re: konica c258 ce autentication

i can confirm if CE password is enabled entering via trouble reset will still request password.

it would be security flaw if it did

if you can contact KM to reset password you will need to do following

At CE password screen press stop then clear

this will give you a token code to supply

Yes but the poster can now use the default 9272 password not the one he doesnt know.

[rrrohan]

Re: konica c258 ce autentication

Yeah but then you have to do run-up procedure again.

Resetting code with help from KM is much easier imo

[Desert Rat]

Re: konica c258 ce autentication

Interesting thread. Thanks for posting it.

I am considering selling one of these to a long time customer. From what I gather it sounds like a fairly good machine.
He will need to be able to run the 12X18" paper, so I may have to look at the BHC308.

But I am interested in what techs that work on this model have to say. Any re-occurring problems? Or quirks?
I am an indy and will find the service manuals before I get the machine.

Is this CE authentication turned on at the factory? I have worked the BHC line for a number of years and would like
to stay with this brand.

Thanks

DR