Konica 654 transfer unit rebuild..

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kobi gabay
    Technician
    • Apr 2016
    • 20
    #1

    Konica 654 transfer unit rebuild..

    Hi guys.
    I would be happy to get some help and advice from anyone who has experience rebuilding the Minolta BH654 transfer unit.
    Thank in advance for your help.
    Tags: experience, konica 654 transfer unit, rebuilding, transfer, unit
    • allan
      RTFM!!

      5,000+ Posts
      • Apr 2010
      • 5459
      #2
      Re: Konica 654 transfer unit rebuild..

      The supplier of the 3de party parts should give you instructions.
      Whatever

        Comment

        • kobi gabay
          Technician
          • Apr 2016
          • 20
          #3
          Re: Konica 654 transfer unit rebuild..

          Originally posted by allan
          The supplier of the 3de party parts should give you instructions.

          Unfortunately didn't find nothing about it.....

            Comment

            • copyman
              Owner / Technician

              Site Contributor
              2,500+ Posts
              • Sep 2005
              • 4545
              #4
              Re: Konica 654 transfer unit rebuild..

              I have rebuilt several successfully. There are no instructions but try and find the instructions for the C451, 552, etc. They are very similar.

              As last resort use the instructions for a C253, etc. Not the same but will give you general idea of disassembly.

              Katun.com has some good rebuild instructions on their website under "resources"

                Comment

                • kobi gabay
                  Technician
                  • Apr 2016
                  • 20
                  #5
                  Re: Konica 654 transfer unit rebuild..

                  Originally posted by copyman
                  I have rebuilt several successfully. There are no instructions but try and find the instructions for the C451, 552, etc. They are very similar.

                  As last resort use the instructions for a C253, etc. Not the same but will give you general idea of disassembly.

                  Katun.com has some good rebuild instructions on their website under "resources"
                  HI.
                  Thank you for your help.
                  The small one I rebuild all the time C280,360, 253....
                  I will try to look for inst for 451,552.
                  Thank you 🙏

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22947
                      #6
                      Re: Konica 654 transfer unit rebuild..

                      I've only disassembled two. The one that was broken when it was removed without removing the right door stoppers, and the one with the torn belt that donated the broken plastic guides to repair the other. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • copyman
                          Owner / Technician

                          Site Contributor
                          2,500+ Posts
                          • Sep 2005
                          • 4545
                          #7
                          Re: Konica 654 transfer unit rebuild..

                          Originally posted by blackcat4866
                          I've only disassembled two. The one that was broken when it was removed without removing the right door stoppers, and the one with the torn belt that donated the broken plastic guides to repair the other. =^..^=
                          Been there, done that! Sometimes that is only way to learn if no instructions for units that weren't made to be rebuilt.

                          If anything I look at it as not only making a much greater profit with rebuilding units but also helping the enviroment. Since most OEM's including Kon/Min don't have enviromental programs in place to return the units for them to rebuild it helps some. If they just put a return label in box with new factory units most will send old belts, IU's, drums, etc back. Nope, they just throw them into the landfills !!!

                            Comment

                            Previous template Next
                            Working...