If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Bizhub c454e Error code C - D3A0 (Afther updating firmware)
then may I suggest you get a trained tech in there... Clearly this is above your pay grade!
"If being a Copier Repair Tech is soooooo easy the whole world would be one.!"
I am not saying that it is easy, it is difficult for most users in general, and even more difficult for ordinary people.
I do not consider myself a super expert in printing technology, but I do it myself:
1. Changed the transfer tape separately from the entire block
2. Sorted through the development unit, changed the magnetic shaft and sifted the developer from the garbage through women's tights
(color development differs from black only in price, chip and some mixed toner in them)
3. I cleaned the cleaning squeegee and changed the drums.
(not to mention the fact that black drums differ from color ones only in chip and price)
4. Separately changed the lamp and thermal film on the fusing unit.
5. I know how much the developer needs to add to the 612/615/616/622 toner of each color in order to get 512 / 321.
Everything that concerns 80% of ordinary servicing of the mechanical part of this machine, I know better than 80% of its users, I am 80% sure of this
Yes, in the software part I am not strong, but this is part of the problem of closed information about it.
Do you know what is the average retail price for a print in Russia? 8 rubles for A4 - 4 + 0. This is $ 0.12 per sheet, for the end customer. And this is not even the lowest price!
This price is not for offset circulation, but from 10-50 sheets!
In the conditions of such a market and competition, in almost every print shop and printing house there is a person who is not an engineer, who does not have the appropriate education, but who is able to sort out the fuser or drum with his eyes closed.
We would be happy to use the services of service companies, but then we will not have customers.
I highly appreciate the work of specialists, and I respect them very much for their knowledge, it really costs a lot. It's just, as one Russian proverb says: we are not like that - life is like that.
Comment