C360 - LICENSE ERROR

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lordamet
    Technician
    Site Contributor
    • Apr 2020
    • 17

    C360 - LICENSE ERROR



    Good evening, recently removed the nvram from my bizhub c360 mfp and now I have an error on the screen that says: an error occurred with the license.

    can you help me please. I do not have an MK account so I cannot enter the CE portal to obtain a new license I appreciate any help



  • femaster
    Service Manager
    1,000+ Posts
    • May 2011
    • 1323

    #2
    Re: C360 - LICENSE ERROR

    Originally posted by lordamet


    Good evening, recently removed the nvram from my bizhub c360 mfp and now I have an error on the screen that says: an error occurred with the license.

    can you help me please. I do not have an MK account so I cannot enter the CE portal to obtain a new license I appreciate any help
    See this post, works for any of the older models, like your C360:
    Solving "License Error" messages without access to LMS
    A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

    Comment

    • lordamet
      Technician
      Site Contributor
      • Apr 2020
      • 17

      #3
      Re: C360 - LICENSE ERROR

      Originally posted by femaster
      see this post, works for any of the older models, like your c360:
      solving "license error" messages without access to lms

      are you use this one before??

      Comment

      • femaster
        Service Manager
        1,000+ Posts
        • May 2011
        • 1323

        #4
        Re: C360 - LICENSE ERROR

        Originally posted by lordamet
        are you use this one before??
        Not this specific serial/code combination, but I have used another combination I found somewhere else on a few machines in the past and it worked fine.

        Just to clarify, you are talking about a "License Management Error" on a C360 (not a C360i), correct? If so, the previous link should work for you.

        Here is another link with a better description. The serial/code combination is the same, but this one might be easier to follow:
        Bizhub C353 "License Management Error"
        Last edited by femaster; 05-25-2020, 04:45 AM.
        A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
        My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

        Comment

        Working...