Request bizhub c220 firmware

[TryToCopy]

Re: Request bizhub c220 firmware

thanks for the kudos.

BUT I respectfully request you watch your tone/attitude with users here esp the ones that know what the fuck they are talking about. TBS is a GREAT tech and is willing to help ANYONE out there that requires help.

Keep that 'tude up and you will start earning RED CARDS. Just a word of warning .. take it or leave it dude.

Sorry if my tone was too harsh! The last sentences of his post are clearly unnecessary, it just doesn't contribute to any problem solving being offensive...

When you do Initialize All in System 1 sometimes it will disable HDD common rookie mistake.

The first sentence actually was helpful, thanks for that. But what was the rest for? I came to this forum because it seemed to be run by people who are helping with issue related troubleshooting.
That's why i contributed, because the help i've got yesterday, in a very little amount of time was outstanding! I think like anybody else I don't like being offended..

[Phil B.]

Re: Request bizhub c220 firmware

Maybe I didn't make myself clear. I'm not criticize you at all, in fact you find by yourself right solution which gives you at a top of most people coming here pretending for free tech's help and firmware. So more than often Phil B aka Dentist had to pull basic information from topic starter. It's actually refreshing to see someone asking intelligent questions and very satisfying when people give others feedback. Unfortunately that is rather to be seen here. That was my point.

+10 brother!

[Phil B.]

Re: Request bizhub c220 firmware

Sorry if my tone was too harsh! The last sentences of his post are clearly unnecessary, it just doesn't contribute to any problem solving being offensive...



The first sentence actually was helpful, thanks for that. But what was the rest for? I came to this forum because it seemed to be run by people who are helping with issue related troubleshooting.
That's why i contributed, because the help i've got yesterday, in a very little amount of time was outstanding! I think like anybody else I don't like being offended..

OK you have been warned in public n private...

CONGRATS you have pissed me off enough to throw you your first RED CARD GOOD JOB BOZO!

don't expect help from me anymore!

[TryToCopy]

Re: Request bizhub c220 firmware

Maybe I didn't make myself clear. I'm not criticize you at all, in fact you find by yourself right solution which gives you at a top of most people coming here pretending for free tech's help and firmware. So more than often Phil B aka Dentist had to pull basic information from topic starter. It's actually refreshing to see someone asking intelligent questions and very satisfying when people give others feedback. Unfortunately that is rather to be seen here. That was my point.

Sorry for the misunderstanding, its been a long day...

[TryToCopy]

Re: Request bizhub c220 firmware

OK you have been warned in public n private...

CONGRATS you have pissed me off enough to throw you your first RED CARD GOOD JOB BOZO!

don't expect help from me anymore!

Well thanks for your help anyways!

It wasn't my intention to attack anybody, the thing with my grey matter or laziness just didn't feel right for me after everything I've tried.
I did not want to piss anybody off...

[tsbservice]

Re: Request bizhub c220 firmware

Sorry for the misunderstanding, its been a long day...

No harsh feelings here. I just regret the fact this overall good thread takes this way maybe because some misunderstanding. I will give you green card because of this.

P.S.
Great thanks to fellow techs who know what I mean.
All stay safe and have a good summer.

[TryToCopy]

Re: Request bizhub c220 firmware

Big thanks to the forum for your help, everything is working great so far!

[mga]

Re: Request bizhub c220 firmware

Big thanks to the forum for your help, everything is working great so far!

Thank you for the update it's nice sometimes when we hear the outcome you will start to know the users that know what they are talking about stay safe

[emujo2]

Re: Request bizhub c220 firmware

Be careful, your 10th Red Card autmatically deduct $100.00 from your bank account. Ed

[tsbservice]

Re: Request bizhub c220 firmware

Be careful, your 10th Red Card autmatically deduct $100.00 from your bank account. Ed

Not witty as Synth but keep trying

[MarioTech]

Re: Request bizhub c220 firmware

[QUOTE=TryToCopy;1529775]It is an old machine from the place i work, it had some issues so my boss bought a newer model and gave the old one to me, so i could try fixing the problems and use it for myself.
Shortly after I got it, I read in some forums that suggested to reset the Printer through the Service Mode what I did then.
All of the former software issues where fixed by that, but I had to put aside the project, due to a lack of time. That was 9 month ago.
At my workplace the printer hasnt seen any technician, except me, for around 2 to 3 years. Makes it summed up around 3 to 4 years surely no firmeware update. (I don't know if there are any updates that came out in that time)

A few days ago I started the project again and there seemed to be some functions missing some guys were talking about on a youtube video.
So I was thinking that it might be due to a missing firmeware update.

You can find screenshots of my printers firmeware dialog attached (page 4 and 5 have no entries)

Greets[/QUOTE
The last firmware that came out is Version bizhub C220, C280, C360 Firmware Version G00-D2
It came out out in 2012, what issues are you having?

[copier tech]

Re: Request bizhub c220 firmware

[QUOTE=MarioTech;1532227]

It is an old machine from the place i work, it had some issues so my boss bought a newer model and gave the old one to me, so i could try fixing the problems and use it for myself.
Shortly after I got it, I read in some forums that suggested to reset the Printer through the Service Mode what I did then.
All of the former software issues where fixed by that, but I had to put aside the project, due to a lack of time. That was 9 month ago.
At my workplace the printer hasnt seen any technician, except me, for around 2 to 3 years. Makes it summed up around 3 to 4 years surely no firmeware update. (I don't know if there are any updates that came out in that time)

A few days ago I started the project again and there seemed to be some functions missing some guys were talking about on a youtube video.
So I was thinking that it might be due to a missing firmeware update.

You can find screenshots of my printers firmeware dialog attached (page 4 and 5 have no entries)

Greets[/QUOTE
The last firmware that came out is Version bizhub C220, C280, C360 Firmware Version G00-D2
It came out out in 2012, what issues are you having?

We have a later version out GDR-D1

C360 C280 C220 Firmware ReadMe GDR-D1.pdf

[femaster]

Re: Request bizhub c220 firmware

We have a later version out GDR-D1

[ATTACH]46294[/ATTACH]

What you have there is special firmware, not the base firmware. Special firmware shouldn't be used unless the customer is having an issue that the special firmware is known to resolve, or needs a certain feature or setting that the firmware incorporates. Also, even though the date on that special firmware might be more recent, the D1 indicates that it is in fact an earlier revision, and the seemingly older base firmware of D2 is in fact newer.

[copier tech]

Re: Request bizhub c220 firmware

What you have there is special firmware, not the base firmware. Special firmware shouldn't be used unless the customer is having an issue that the special firmware is known to resolve, or needs a certain feature or setting that the firmware incorporates. Also, even though the date on that special firmware might be more recent, the D1 indicates that it is in fact an earlier revision, and the seemingly older base firmware of D2 is in fact newer.

In the UK this is not referred to as "special firmware" It is simply the latest firmware in-between a mass production release.

There is a list of bug fixes in these latest versions (see attached pdf.) we update our machines when ever a new release comes out, it makes a difference for reliability.

We call it "preventative maintenance" i'e fix the fault before it is reported by the client.


C360 C280 C220 Firmware ReadMe GDR-D1.pdf

[femaster]

Re: Request bizhub c220 firmware

In the UK this is not referred to as "special firmware" It is simply the latest firmware in-between a mass production release.
There is a list of bug fixes in these latest versions (see attached pdf.) we update our machines when ever a new release comes out, it makes a difference for reliability.
We call it "preventative maintenance" i'e fix the fault before it is reported by the client.

To each there own I guess. There have been notices issue by KM about using "special firmware" when it's not needed because on occasion that firmware can cause other issues that aren't present in the base firmware. Some of those special firmware actually have older versions of things that were "rolled back" because a later version broke something that only a rare few customers used. A classic example of this is right in the firmware you are offering up as newer. Your firmware is based off of revision D1, which is older than D2. What fixes are you missing from your "newer" firmware that were incorporated in revision D2?

If it's been working for you, great. Hopefully you won't come across one of those instances were something breaks because of it.