jamming in all casset konica 7030

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • smiley
    Senior Tech

    500+ Posts
    • Aug 2008
    • 616

    #1

    jamming in all casset konica 7030

    hi guys any one can help me fix the prdb board of this machine.please.
    there is no glory without sacrifice
  • albano
    Technician
    • Jan 2009
    • 17

    #2
    Hi there, do you have more problems with another motors ?, try to check the fuses on the controller board.....

    Comment

    • smiley
      Senior Tech

      500+ Posts
      • Aug 2008
      • 616

      #3
      hi, yup all motors never work and if you press print it says paper jam.
      there is no glory without sacrifice

      Comment

      • kingarthur
        Service Manager

        1,000+ Posts
        • Feb 2008
        • 1320

        #4
        check ICP 11
        Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

        Comment

        • smiley
          Senior Tech

          500+ Posts
          • Aug 2008
          • 616

          #5
          Originally posted by kingarthur
          check ICP 11
          hi kingarthur can please healp me locate the icp 11.please.
          there is no glory without sacrifice

          Comment

          • kingarthur
            Service Manager

            1,000+ Posts
            • Feb 2008
            • 1320

            #6
            it's on the PRCB, the small pcb at he rear of the m/c, p/no 26NA-902. On the pcb there is a red led , at the rear right corner, at the front right corner is ICP11, it's probably worth checknig all the ICP's whilst you're at it. The ICP's are easy to replace.
            Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

            Comment

            • redime

              #7
              Whats the jam code?

              Could be a bad loop/reg clutch.

              Comment

              • smiley
                Senior Tech

                500+ Posts
                • Aug 2008
                • 616

                #8
                hi guys sorry for the late reply i fund out that all motor doens't work.can any one show me the picture of icp 11.please.
                there is no glory without sacrifice

                Comment

                • redime

                  #9
                  Originally posted by smiley
                  hi guys sorry for the late reply i fund out that all motor doens't work.can any one show me the picture of icp 11.please.
                  Bottom right corner of board

                  Comment

                  • smiley
                    Senior Tech

                    500+ Posts
                    • Aug 2008
                    • 616

                    #10
                    thank redime i'll will try to change it thank you soo much.
                    there is no glory without sacrifice

                    Comment

                    Working...