Getting this black deposit bottom of prints

[positiveg]

Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks

Sent from my SM-G955F using Tapatalk

[Copier Addict]

Re: Getting this black deposit bottom of prints

Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks

Sent from my SM-G955F using Tapatalk

Take the drum apart and clean the grid. If that doesn't do it you will likely need to replace the dev unit. Check life counts and replace any drums that are over yield.

[Phil B.]

Re: Getting this black deposit bottom of prints

Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks

Sent from my SM-G955F using Tapatalk

it looks like drum issue to me.

i take it the paper feed is LEF... have you tried running it SEF that should remove remove the defect from the print.

what are the page counts on drum/dev... also take a look at the ITB for a like smear. Do a stop test to see if it's on he belt

[tulintron]

Re: Getting this black deposit bottom of prints

Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks

Sent from my SM-G955F using Tapatalk

Developer and drum are in contact for some reason. Check DU and UI

[positiveg]

Re: Getting this black deposit bottom of prints

Ok cool will check the SEF/LEF and go from there.
Then will also check the IBT. And get back to you.
Will get yoy the numbers on the drums as well thanks

Sent from my SM-G955F using Tapatalk

[tsbservice]

Re: Getting this black deposit bottom of prints

Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks

Sent from my SM-G955F using Tapatalk

This isn't right image to post. We need separation go in SM and print CMYK halftones. Then if all 4 colors are affected it's ITB. If only single color is affected you will know where to start.

[Phil B.]

Re: Getting this black deposit bottom of prints

This isn't right image to post. We need separation go in SM and print CMYK halftones. Then if all 4 colors are affected it's ITB. If only single color is affected you will know where to start.

well brother I agree but I work with what I'm given.

[mojorolla]

Re: Getting this black deposit bottom of prints

Ok cool will check the SEF/LEF and go from there.
Then will also check the IBT. And get back to you.
Will get yoy the numbers on the drums as well thanks

Sent from my SM-G955F using Tapatalk

Wait a minute, this is a booklet; it can only SEF.

[Phil B.]

Re: Getting this black deposit bottom of prints

Wait a minute, this is a booklet; it can only SEF.

from the look of the smears I don't agree.

[tsbservice]

Re: Getting this black deposit bottom of prints

well brother I agree but I work with what I'm given.

Completely agree Phil.

Wait a minute, this is a booklet; it can only SEF.

Completely agree mojorolla.

[mojorolla]

Re: Getting this black deposit bottom of prints

from the look of the smears I don't agree.

Go back to trolling Phil, that's the dumbest shit you ever posted, and that's saying a lot.

EDIT: Hey Phil, thanks for the downvote. I gave you one too for shit advice.

[positiveg]

Re: Getting this black deposit bottom of prints

Phil made an error.
But anyway seems like the IBT belt did have some smears on it. So was right there.
These are the numbers on the consumables.

Sent from my SM-G955F using Tapatalk

[Synthohol]

Re: Getting this black deposit bottom of prints

if its not the drum/dev a clogged waste port from the belt is my next thing to inspect.
its a little bit of a pain to remove and clean but can be done in 15 min. (on the 4 series at least)
the port from the belt to the WTB, not the belt cleaning port on the belt itself.

[Phil B.]

Re: Getting this black deposit bottom of prints

Ok cool will check the SEF/LEF and go from there.
Then will also check the IBT. And get back to you.
Will get yoy the numbers on the drums as well thanks

Sent from my SM-G955F using Tapatalk

how big is the finished product?

is it folded?

what is the size paper you are using ?

[positiveg]

Re: Getting this black deposit bottom of prints

how big is the finished product?

is it folded?

what is the size paper you are using ?

11*17 folded. To me it also felt like there was a li'l back up going to the waste toner cartridge. But I ran a print after ans it's good. This is 11*17

Sent from my SM-G955F using Tapatalk