Biz C224e - Muratec version?

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 23002
    #16
    Re: Biz C224e - Muratec version?

    You can also change the hostname to: KonMin224 or whatever you like.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

      Comment

      • copyman
        Owner / Technician

        Site Contributor
        2,500+ Posts
        • Sep 2005
        • 4650
        #17
        Re: Biz C224e - Muratec version?

        Just wanted to update. The Muratec version can totally be converted to the BizHub model. I swapped out the toner holder & front cover from a parts C224e. Updated firmware and changed Dip switch. The machine now thinks it's a Kon/Min. Still have to change the boot screen but that should be it. Probably put the customers logo on it.

        Still going to put a small label inside front cover and on rear side near Muratec serial # label, stating "This machine has been converted from Muratec to Kon/Min BizHub". Not so much for my customer who knows about conversion but more for a tech working on it in the future.

        Thanks again everyone and hope this helps someone else.

          Comment

          • Reed
            Senior Tech

            Site Contributor
            250+ Posts
            • Feb 2011
            • 258
            #18
            Re: Biz C224e - Muratec version?

            Originally posted by copyman
            can't ask the customer the cut the fin. it took a little more time but as I mentioned I used the toner holder from a C224. Swapped front cover to a C224e. Firmware & dip switch change worked and machine now thinks it's a C224.
            I cut the fin off before delivery. I don't ask the customer to do it

            Sent from my SM-G955U using Tapatalk

              Comment

              • copyman
                Owner / Technician

                Site Contributor
                2,500+ Posts
                • Sep 2005
                • 4650
                #19
                Re: Biz C224e - Muratec version?

                Originally posted by Reed
                I cut the fin off before delivery. I don't ask the customer to do it

                Sent from my SM-G955U using Tapatalk
                Figured that's what you meant. I should of been more clear just didn't want to have to cut ribs on 10 or 20 toners at a time. If it was at regular customer getting one two toners a year no big deal I would cut the fins. Like I posted they have 5 machines at this one location, this will be the sixth using all the same toner. They order a lot of toner. They love the C224's and when I couldn't find a decent low meter C224 I went for the Muratec. The rest is history.

                  Comment

                  • rrrohan
                    Service Manager

                    Site Contributor
                    1,000+ Posts
                    • Sep 2011
                    • 1977
                    #20
                    Re: Biz C224e - Muratec version?

                    Originally posted by Reed
                    Firmware is the same.. I've often wondered what software switch would make the machine show bizhub upon start up as opposed to muratec..
                    im guessing when mfpb is installed and firmware is loaded for first time it will be something to do with the option you set in Machine Type.

                      Comment

                      • copyman
                        Owner / Technician

                        Site Contributor
                        2,500+ Posts
                        • Sep 2005
                        • 4650
                        #21
                        Re: Biz C224e - Muratec version?

                        Originally posted by rrrohan
                        im guessing when mfpb is installed and firmware is loaded for first time it will be something to do with the option you set in Machine Type.
                        It's actually a soft switch that "badges" the copier. I think they come out of the same factory with a different serial # label, soft switch changed & boot screen. And as was discussed in this thread the toners have fins on them so the OEM's make you but only their toner. Someone also mentioned the drums may have something different on them so they can't me interchanged between different OEM models? Going to check that out later tonight.

                        Don't want to post the soft switch on public forum as it was given to me in private. If you are a known member here PM if you need it.

                          Comment

                          • rrrohan
                            Service Manager

                            Site Contributor
                            1,000+ Posts
                            • Sep 2011
                            • 1977
                            #22
                            Re: Biz C224e - Muratec version?

                            i guess u could order a new front cover so the key matches the toner from konica

                              Comment

                              • copyman
                                Owner / Technician

                                Site Contributor
                                2,500+ Posts
                                • Sep 2005
                                • 4650
                                #23
                                Re: Biz C224e - Muratec version?

                                Originally posted by rrrohan
                                i guess u could order a new front cover so the key matches the toner from konica
                                I had a parts C224 and used the toner cover from that.

                                  Comment

                                  Previous 1 2 template Next
                                  Working...