anyone seen this seems very intermittant at times stops just before reg rollers
-
-
If the paper hasn't reached the reg sensor replace all the feed rollers & clutches. Or the complete feed unit. If the device has a high count the reg sensor arm can wear down causing the same issue.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
-
Change the one way bearing in drive unit.Comment
-
not sure which one way u are talking about
Comment
Comment