c450 fuser unit reset

[cantonakis]

Does anyone know how to reset a c450 fuser unit ?

[LAKY]

c 450

through reset fuse
Copier parts, imaging supplies, photoreceptors, service accessories and printer products from Katun

[crm.84]

1-Open right side door and remove inside front cover for 12 pin black connector.
2-Place a jumper between pins 1 and 2 green wires. Make sure jumper wire is thin ie staple, thin paper clip, etc.
3-Close door and power up the machine-wait until the basic screen comes up then immediately turn machine off.
4-Remove jumper and power up machine and check fuser life counter-
May have to do this more than once as you have to catch the machine just as the basic screen shows before shutting off. My first time it took me 3 attempts before I got it.
works on 350, 351, and 450

[higherlevel]

Fuser Reset ??

as the basic screen shows before shutting off. My first time it took me 3 attempts before I got it.
works on 350, 351, and 450


YOUR TALKING ABOUT BLACK AND WHITE MACHINES HERE AS C450 IS COLOR !!

This Reset should work for C350 also !!

[pepper38_cnd]

Replace the pico fuse, shorting pins is a dangerous practice. If you can't afford the fuser you probably can't afford the board you risk blowing.

[ck1]

Replace the pico fuse, shorting pins is a dangerous practice. If you can't afford the fuser you probably can't afford the board you risk blowing.

i Agree with you pepper38

[cantonakis]

ok I used the jumper method and worked fine
Many Thanks to all of you

[sulemandw]

Re: c450 fuser unit reset

from which way between 1 and 2 pin just clear this confusion
thanks