Hello,
I am a junior technician and currently checking iR3045 machine. This machine produces black color over the pages (all pages covered by black...
182 results in 0.0296 seconds.
-
Drum unit (drum house)
-
canon ir 5000 no seperation
hello to everyone, i have a canon ir5000 but im having problem with the seperation of paper, i've noticed the corona wire is not lit, i've already change... -
C353 shorting out
We have a customer with a C353 inconveniently located 90 miles away, so trial and error wouldn't be too productive.
The machine is tripping... -
KM 3050 tray lift up motor problem
Have a KM 3050 that detects tray 1,detects paper size but the tray motor does not work.<br>Switched motor en switch and paper feed from tray 2 with... -
faint display
OK GOT A KM-3O40 WHERE THE DISPLAY WILL NOT ADJUST ENOUGH TO BE SEEN IN REGULAR LIGHT . YOU CAN TURN IT WAY UP AND IT IS VERY LIGHT AND WHEN YOU TURN... -
NP6030 Black Lines
I know I'm reaching back here. Black lines about 1mm wide in the cross feed direction equal to the drum pattern. Changed drum and it went away for a day... -
Black lines on copies IR3225
Black lines intermittently on copies. any suggestions. -
MX-4501N blowing fuse when fusing unit is connected.
F1 fuse on the ac board keeps blowing on me Ive tried a new loom which isnt the problem and borrowed another fusing unit which kept displaying heating... -
canon ir 550 E069
rebuilt fuser, replaced HV-DC PCB,replaced trans./sep. corona unit still has error -
aab1 started a topic Why does opening and closing the door make the printer think toner has been added?in CanonWhy does opening and closing the door make the printer think toner has been added?
One thing that bothers me with my first laser printer/copier is that it keeps saying it's out of toner and stops printing, but just by opening and closing... -
Aficio 3035 won't start
Hello and good afternoon! (my clock is 2.25pm
)
I've a machine, Aficio 3035 which couldn't start at all. Only the "main power"... -
Konica minolta c500 pro fake jam code after paper exits
Reposting this without the finisher code that i previously posted it with.
I removed the finisher and the i still have the same problem. The machine... -
078 - 273
Have a DC250 with high capacity feeder. Error code 078 - 273 appeared when machine was switched on yesterday. Cannot clear fault or find anything relating... -
Ricoh 551 / 700 sc345
As soon as it tries to make a copy, it throws this code. Was previously getting td sensor errors, and losing its density after the development unit seized... -
Problems with a Sharp AR-286
I have a old AR-286 that has recently developed a jamming problem. It'll feed paper until it hits the end of the drum where it becomes hooked and folds...
