background color problem konica minolta c280

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gazera6
    Junior Member
    • Oct 2021
    • 1

    #1

    [Misc] background color problem konica minolta c280

    hi all

    i have a problem in konica minolta c280
    this is:
    printing yellow background in the pc printing

    note: no problem in printing in black color as photo

    please check the attached photos

    please help me solve this problem
    Attached Files
  • copier tech
    Field Supervisor

    5,000+ Posts
    • Jan 2014
    • 8132

    #2
    Re: background color problem konica minolta c280

    Originally posted by gazera6
    hi all

    i have a problem in konica minolta c280
    this is:
    printing yellow background in the pc printing

    note: no problem in printing in black color as photo

    please check the attached photos

    please help me solve this problem
    What have you tried so far?

    Most likely the yellow drum needs replacing.

    You can swap the colour drums around for troubleshooting.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk

    Comment

    • copyman
      Owner / Technician

      Site Contributor
      2,500+ Posts
      • Sep 2005
      • 4620

      #3
      Re: background color problem konica minolta c280

      Originally posted by gazera6
      hi all

      i have a problem in konica minolta c280
      this is:
      printing yellow background in the pc printing

      note: no problem in printing in black color as photo

      please check the attached photos

      please help me solve this problem
      The print samples are great help but need more information because several things can cause that poor quality.

      What do the consumable life counters look like? If anything at "0"% replace those items.

      Like the other poster said have you tried anything before posting here? Most techs at least try the basic things before posting here, i.e. cleaning print heads & coronas, swap drums, look and see if dev units dumped or starting to dump, etc etc

      Comment

      Working...