Questions attaching the FS526 Finisher to the Konica Minolta Bizhub c552

[Gregory Coleman]

I recently picked up a used Konica Minolta Bizhub C552 copier with an SF526 finisher. After transporting the machine, when I went to reassemble it I was missing 2 clips or brackets that fasten the finisher to the copier. They slide between the finisher and the copier from the front and there are screws or something that holds the clips in place. I do not know how to identify the exact part by name or number and I do not know where to order it once I have identified it.

Can anyone give me a hand here?

[Synthohol]

14

A11PR73900

Main Body Connection Plate/1Assy

17

A11PR74000

Main Body Connection Plate/2 Assy

1

A11P955100

Mounting Plate /1

bracket.jpg

[Synthohol]

these are my sources.

[copyman]

Good luck finding those parts new. Hopefully you can find them used. I will look and see if I have them. At least you can remove the finisher and horizonal transport bed and use the machine until you find the mounting brackets.

[copyman]

I found these. Two are same and the silver one is from another model. Plate should be correct.
Yours for free, just pay shipping fin brack_IMG_3640.jpg