Dusting off a DI850 that hasn't run is several years. Installed new drum, can't run drum setting in 36 mode. Getting error SC23-06 and my service book doesn't have codes list. I'm guessing a motor isn't turning(blade?). Anyone have a code list?
-
-
Re: Bizhub DI850 error code SC23-06
Check on M14 (blade) movement
incompletion. The drum READY1 sig
nal (ready) is not detected within spec
ified time after turning ON of M2
(drum), or the drum READY1 signal
(not ready) is not detected within spec
ified time after turning OFF of M2. At
this time, no abnormal detection signal
is detected.
ill send you a PM in 2 minutes.We know a thing or two because we've seen a thing or two.
The medication helps though... -
Re: Bizhub DI850 error code SC23-06
Finally got back to the error code. Turns out M14 blade motor was not turning, so today I'm a clock repairman. No code now.Comment
-
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.Comment
-
Re: Bizhub DI850 error code SC23-06
Wow! A machine of the past. 85 ppm heavy monster! Remember them all to well. We had some that ran good, if used the way they were designed for, big office non-stop use. And of course a trained tech to maintain them without cheating on PM. I have two or three Di-251's I still service. Getting to the point parts are all aftermarket. If an oddball part like a gear or something breaks customer may be screwed and have no choice but to upgrade into 21st century...
Good luck with keeping the old girl alive....Comment
Comment