konica minolta c3321i legal size question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • brent
    Service Manager

    Site Contributor
    1,000+ Posts
    • Nov 2008
    • 1211

    #1

    konica minolta c3321i legal size question

    so I know this is probably a simple question. but I set the paper in the manual bypass to legal.. I tell the machine its legal. then I put a legal document in the doc feeder
    and it still only copies letter . it cuts off what was on the legal original from the doc feeder.. am I missing a step or will this only scan letter since it is a letter only machine?
    thanks for the help although this isnt a broken machine hopefully the quesion will be answered. thanks
    brent
  • Synthohol
    Certified Konica Expert

    Site Contributor
    5,000+ Posts
    • Mar 2016
    • 5793

    #2
    is the bypass included in the auto tray selection?
    We know a thing or two because we've seen a thing or two.
    The medication helps though...

    Comment

    • KMFLT3CH
      Trusted Tech

      100+ Posts
      • May 2017
      • 222

      #3
      I've had this exact issue. You need to tell the machine it's a legal document, these little A4 machines are dumb. Either select the legal tray before hitting the start button or change original size to legal, I forget which one.

      Comment

      • brent
        Service Manager

        Site Contributor
        1,000+ Posts
        • Nov 2008
        • 1211

        #4
        Originally posted by KMFLT3CH
        I've had this exact issue. You need to tell the machine it's a legal document, these little A4 machines are dumb. Either select the legal tray before hitting the start button or change original size to legal, I forget which one.
        ok dang it. the machine knows its legal and the bypass also does.. it just won't print a full sheet I lookd in the specs sheet it shows it only prints letter. so that may be the issue

        brent

        Comment

        • brent
          Service Manager

          Site Contributor
          1,000+ Posts
          • Nov 2008
          • 1211

          #5
          ok solution found. in the no original settings on the screen the tell the machine what the original was. you guys were right thank you
          brent

          Comment

          Working...