Bizhub 363 blur printing/copying in the morning

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • KM7155
    Trusted Tech
    • Aug 2008
    • 146
    #1

    Bizhub 363 blur printing/copying in the morning

    Dear guys,
    BH363 printing and copying blur in the morning. after few hours it will back to normal.
    it will happen again the next morning. i have changed the IU set, problem still there.
    any advise will be much appreciated.


    cheers...
    Tags: blur, morning, set
    • copyman
      Owner / Technician

      Site Contributor
      2,500+ Posts
      • Sep 2005
      • 4718
      #2
      Re: Bizhub 363 blur printing/copying in the morning

      Originally posted by KM7155
      Dear guys,
      BH363 printing and copying blur in the morning. after few hours it will back to normal.
      it will happen again the next morning. i have changed the IU set, problem still there.
      any advise will be much appreciated.


      cheers...
      How cold does it get overnight? Or is copier located in a humid environment that air condition is off at night and turned on in morning?

      These are only thing I can think of at the moment that makes sense.

      If anything else comes to mind will post later.

      Another thing comes to mind. Is the copier located near a window that morning sun shines on it?
      Last edited by copyman; 03-05-2022, 11:42 PM.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 23009
          #3
          Re: Bizhub 363 blur printing/copying in the morning

          I agree.

          Samples would be nice:
          =^..^=
          Attached Files
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • KM7155
              Trusted Tech
              • Aug 2008
              • 146
              #4
              Re: Bizhub 363 blur printing/copying in the morning

              Originally posted by copyman
              How cold does it get overnight? Or is copier located in a humid environment that air condition is off at night and turned on in morning?

              These are only thing I can think of at the moment that makes sense.

              If anything else comes to mind will post later.

              Another thing comes to mind. Is the copier located near a window that morning sun shines on it?

              Thanks mate for the reply.
              Im in Asia, so the night will not be cold, and yes, the office
              A bit humid, but the machine running fine for more than 1 year
              Already, this problem just happen recently.
              Will get the sample and post here.

                Comment

                • tsbservice
                  Field tech

                  Site Contributor
                  5,000+ Posts
                  • May 2007
                  • 8020
                  #5
                  Re: Bizhub 363 blur printing/copying in the morning

                  +1 on environmental. Personally I would check/clean/replace all filters and this model have a plenty - ozone, toner, developer filters etc.
                  A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                  Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                    Comment

                    Previous template Next
                    Working...