Biz 25E

[copyman]

Is there anyway to turn off the drum message or set to not stop until I can find a new drum? I've looked everywhere for a new drum but all back ordered (Thanks again Kon/Min for screwing your customers)

In the past I've tried rechipping toner & drums but the chips didn't work well.

Looked through service manual and didn't see anything for "no stop". Think this is a Muratec rebadge?

Thanks in advance for the help

[Toxic]

Re: Biz 25E

I think there is no way to do that without new good chip, tried once

[femaster]

Re: Biz 25E

Those machines use an EPROM style chip instead of just a simple fuse chip, so all life data is stored in the chip itself. Only way to clear it is with a new chip or drum.