Can the bizhub 4020 driver bein used for a Lexmark MX511de?

[tsbservice]

Re: Can the bizhub 4020 driver bein used for a Lexmark MX511de?

If its that critical your customer needs Follow Me Printing. Ysoft...

With biz/lex 4020...nah. If I should be concerned that much then no 4-5 generations old machine at the customer no matter what.

[techsxge]

Re: Can the bizhub 4020 driver bein used for a Lexmark MX511de?

Ok here is the last option I can think of. Use PS and the PPD. It comes with the config files so it installs normal from the control panel and supports all the trays and duplex and all the other features for this model. There also seems to be a network TWAIN scan driver that is 15Mb's available.
A full 313Kb's.

302 Moved

Ok this was getting annoying for me so i just decided to compile all the drivers into one setup. Scan, Fax, Network, Print.
print_lex510_comp.zip - AnonFiles

[techsxge]

Re: Can the bizhub 4020 driver bein used for a Lexmark MX511de?

With biz/lex 4020...nah. If I should be concerned that much then no 4-5 generations old machine at the customer no matter what.

I'd not even place any machine like that there unless there are requirements that the machine has to fit under the table or something. If i have basically no restrictions there would be atleast a c360i there when im listening to what hans reported about the customers use of the machine.

[Hansoon]

Re: Can the bizhub 4020 driver bein used for a Lexmark MX511de?

If i have basically no restrictions there would be atleast a c360i there when im listening to what hans reported about the customers use of the machine.

Similar is my plan. Since we do mainly in pre-owned equipment, it will be a BH-C-368
For the moment I decided to get from my wholesaler a cheap Lex MC511de to test first all advised procedures here in my workshop before I go to the customer. Then I am sure and will feel confident that at the customer's place it will work as desired.

I thank all of you guy's so much for the very interesting input here and the exceptional help in this matter.

Hans

[techsxge]

Re: Can the bizhub 4020 driver bein used for a Lexmark MX511de?

Similar is my plan. Since we do mainly in pre-owned equipment, it will be a BH-C-368
For the moment I decided to get from my wholesaler a cheap Lex MC511de to test first all advised procedures here in my workshop before I go to the customer. Then I am sure and will feel confident that at the customer's place it will work as desired.

I thank all of you guy's so much for the very interesting input here and the exceptional help in this matter.

Hans

Ok i dont understand this i think. I got that you do mainly pre-owned systems, but if you have such a crucial important customer " this is a specialized medical practice where patients are coming from all around the country and even from outside foreign countries. They are relying on their services. If this machine drops out, procedures and treatment cannot be fulfilled", i personally would not and do not play any funny games with used machines there. I'd put a brand new, up to date machine there.

[Hansoon]

Re: Can the bizhub 4020 driver bein used for a Lexmark MX511de?

Ok i dont understand this i think. I got that you do mainly pre-owned systems, but if you have such a crucial important customer " this is a specialized medical practice where patients are coming from all around the country and even from outside foreign countries. They are relying on their services. If this machine drops out, procedures and treatment cannot be fulfilled", i personally would not and do not play any funny games with used machines there. I'd put a brand new, up to date machine there.

I got what you mean, but my experience over the many years is that pre-owned equipment with up to maximum 100k on the clock is much, much more reliable than brand new, latest&greatest, out of the box, fresh from China, machines. Those used machines are in our workshop being dismantled, cleaned, getting new ORIGINAL KonicaMinolta pickup rollers. Critical consumable parts and color units when they are over 50% of their life as well. K-drums are being replaced almost all the time, K-dev units also when over 50%, same applies for fuser units and TB's. Almost all of our equipment are rentals or put out under maintenance contract.

Hans

[techsxge]

Re: Can the bizhub 4020 driver bein used for a Lexmark MX511de?

I got what you mean, but my experience over the many years is that pre-owned equipment with up to maximum 100k on the clock is much, much more reliable than brand new, latest&greatest, out of the box, fresh from China, machines. Those used machines are in our workshop being dismantled, cleaned, getting new ORIGINAL KonicaMinolta pickup rollers. Critical consumable parts and color units when they are over 50% of their life as well. K-drums are being replaced almost all the time, K-dev units also when over 50%, same applies for fuser units and TB's. Almost all of our equipment are rentals or put out under maintenance contract.

Hans

So there is no newer equipment available for you other than a c368? Well, i guess its better than some lexmark but its your choice what you want to place there. Have a good amount of c360i out there already and so far no issues even with heavy user (except for user errors ofc.)

When we resell a used machine, we always replace all units that are over 90% of their estimated lifetime and use the "old" units for repairs in some small offices


Happy that we're able to help you here tho.

[rrrohan]

Re: Can the bizhub 4020 driver bein used for a Lexmark MX511de?

on konica i use the driver packaging utility after i do one manual install and tell them to run that. thats the best of both world. unattended install with pre filled admin credentials typed in and its the "real" driver