konica c308 , TCR value for black still 0 even if i replace the sensir

[allan]

Re: konica c308 , TCR value for black still 0 even if i replace the sensir

I have had this issue. If you leave the machine idle does it draw the developer out of the K devtank?
Or did the original faulty dev tank have any developer in it?

I an curios to see what happen if the HV board gets replaced.

[Albonline]

Re: konica c308 , TCR value for black still 0 even if i replace the sensir

developer unit that is. i'd do the drum at the same time.

[Albonline]

Re: konica c308 , TCR value for black still 0 even if i replace the sensir